Volumetric Analysis
14 past questions across 13 years (2014–2026).
Start here
Choose your study mode
The full question list is on the right. Use notes or quiz mode when you want focused revision.
Notes
Notebook-style AI notes for this topic.
Quiz mode
Exam-style answers with marking-scheme feedback.
Print pack
Clean print view for paper-based study.
Open inline study tools (notes + practice generator)
Study notes
AI-written notes for Volumetric Analysis in a notebook-style page — with tables, diagrams and worked examples.
Practice question
A fresh exam-style question, generated on demand.
Past exam questions
Quiz2026
1 question · 2 parts- Question 1Paper 1Q1 (c)(i)
Identify a suitable indicator for use in this titration.
Q1 (c)(ii)State the colour change that would be observed at the endpoint in this titration.
2025
1 question · 5 parts- Question 1Paper 1Q1 (a)(5 marks)
Identify a primary standard that the student could have used to standardise the solution of potassium manganate(VII).
Q1 (b)(ii)(9 marks)Explain why using more than one iron tablet in the 250 cm³ of solution increases the accuracy of the analysis.
Q1 (d)(i)Explain why the addition of an indicator into the conical flask was not required.
Q1 (d)(ii)Describe what the student observed at the end point.
Q1 (d)(iii)(12 marks)Describe what would be observed in the conical flask if insufficient acid was present during the titration. Explain your answer.
2024
1 question · 8 parts- Question 1Paper 1Q1 (b)(i)(15 marks)
Calculate the volume of undiluted vinegar which would be required to neutralise 25.0 cm³ of the 0.09 M NaOH solution.
Q1 (b)(ii)Outline an advantage of diluting the vinegar before carrying out the titration.
Q1 (c)(i)(9 marks)Name a suitable indicator for this titration.
Q1 (c)(ii)State the colour change observed at the end point.
Q1 (d)(i)(17 marks)Calculate the number of moles of sodium hydroxide in each 25.0 cm³ portion.
Q1 (d)(ii)Calculate the number of moles of ethanoic acid in each cm³ of the diluted vinegar.
Q1 (d)(iii)Calculate the concentration of ethanoic acid in the original vinegar in moles per litre.
Q1 (d)(iv)Calculate the concentration of ethanoic acid in the original vinegar in % (w/v).
2023
2 questions · 6 parts- Question 1Paper 1Q1 (a)(8 marks)
The reagent (NH4)2SO4·FeSO4·6H2O (hydrated ammonium iron(II) sulfate) was used to prepare a standard solution. State two properties of this substance that make it suitable for use as a primary standard.
Q1 (b)(i)Describe how you would prepare exactly 250 cm³ of a standard solution containing 9.31 g of (NH4)2SO4·FeSO4·6H2O (hydrated ammonium iron(II) sulfate) that was supplied on a clock glass.
Q1 (b)(ii)(15 marks)Why was dilute sulfuric acid added during the preparation of this standard solution?
Q1 (c)(i)How was the end point of each titration detected?
Q1 (c)(ii)(9 marks)If insufficient acid was present in the conical flask, what would have been observed as the KMnO4 solution was added from the burette to the Fe2+ ion solution? Explain.
- Question 4Paper 1
A laboratory technician diluted 25.0 cm³ of a 0.12 M solution to 30.0 cm³ by adding deionised water. Find the new concentration of the solution in moles per litre.
2022
1 question · 3 parts- Question 1Paper 1Q1 (b)(i)
Name a suitable indicator for this titration.
Q1 (b)(ii)What colour change was observed in the conical flask at the end point?
Q1 (c)(ii)Why is it important to maintain this pH during the titration?
2021
1 question · 2 parts- Question 1Paper 1Q1 (d)(9 marks)
(i) Identify a suitable indicator for use in the titration stage of the analysis. (ii) Using this indicator, what final colour change was observed in the conical flask at the end point?
Q1 (e)(20 marks)On average, 21.4 cm³ of 0.09 M sodium thiosulfate solution were required to completely reduce the iodine generated in the conical flask by a 25.0 cm³ portion of diluted bleach. Find by calculation (i) the average number of moles of sodium thiosulfate used up in one of the titrations, (ii) the number of moles of iodine reduced in each titration, (iii) the molarity of the original bleach in terms of hypochlorite ion, (iv) the concentration of CIO¯ ion in the original bleach, to the nearest whole number, expressed as a % (w/v).
2020
1 question · 3 parts- Question 1Paper 1Q1 (a)(5 marks)
Identify a primary standard that could have been used to standardise the hydrochloric acid solution for this analysis.
Q1 (c)(i)Name a suitable indicator for this titration.
Q1 (c)(iii)Using this indicator what colour change was observed in the conical flask at the end point?
2019
1 question · 2 parts- Question 1Paper 1Q1 (b)(12 marks)
(i) Describe how the conical flask was prepared for a titration and then used during the titration to help ensure that an accurate end point was reached. (ii) Give one way of ensuring that the level of liquid in the burette was at eye level before taking a reading.
Q1 (c)(6 marks)(i) What colour changes were observed at the titration stage of the experiment up to the point when the indicator was added, (ii) at the end point?
2018
1 question · 2 parts- Question 1Paper 1Q1 (c)(9 marks)
(i) Name the indicator added to the conical flask. What colour was observed using this indicator (ii) in the presence of M²+, (iii) at the end point?
Q1 (d)(6 marks)A small volume of another solution was added to the water samples before commencing the titrations. (i) Identify this solution. (ii) Why was this solution added?
2017
1 question · 3 parts- Question 1Paper 1Q1 (a)(11 marks)
Explain the underlined term. Give two essential properties of a primary standard for volumetric analysis.
Q1 (b)(9 marks)Explain why it was necessary (i) to use dilute sulfuric acid when preparing the standard solution from hydrated ammonium iron(II) sulfate, (ii) to add more dilute sulfuric acid to each 25.0 cm³ portion of the standard solution used in the titrations.
Q1 (c)(15 marks)Describe fully the procedure used during the titrations to ensure the accuracy of the end point. What observation indicates that the correct end point has been reached?
2016
1 question · 5 parts- Question 1Paper 1Q1 (a)(15 marks)
Describe in detail the procedures involved in measuring a 25.0 cm³ sample of the vinegar and diluting it using deionised water to exactly 250 cm³.
Q1 (b)(9 marks)Name a suitable indicator for this titration. What colour change is observed at the end point?
Q1 (c)(12 marks)Calculate (i) the number of moles of sodium hydroxide in each 25.0 cm³ portion, (ii) the number of moles of ethanoic acid per cm³ of diluted vinegar.
Q1 (d)(9 marks)Find the concentration of ethanoic acid in the original vinegar (i) in terms of moles per litre, (ii) as a percentage (w/v).
Q1 (e)(5 marks)Starting with a primary standard solution made from anhydrous sodium carbonate, what two titrations are required to standardise a sodium hydroxide solution?
2015
1 question- Question 1Paper 1(9 marks)
Name a suitable indicator for this titration. At what stage is the indicator added? State the colour change at the end point in the presence of the indicator.
2014
1 question · 3 parts- Question 1Paper 12014 · Paper 1 · Page 2Full paperLoading the exam page…Q1 (a)(5 marks)Has diagramQ1 (c)(6 marks)Q1 (d)(9 marks)