Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2026 · Paper 1 · Q8(viii) · 9 marks · p.10
Describe an experiment to demonstrate that light waves are transverse waves.
2019 · Paper 1 · Q10(b) · 18 marks · p.8
The experiment was repeated in the school laboratory. The slits were 0.5 mm apart and were placed at a distance of 1.25 m from the screen. The distance across 13 bright fringes on the screen was found to be 1.65 cm. Calculate the wavelength of the monochromatic light. List two adjustment to the apparatus that could be made to increase the distance between the bright fringes.
Marking scheme
Explain, with the aid of a labelled diagram, how a series of bright and dark fringes are produced. [Diagram: Monochromatic light passing through two narrow slits, diffracting, and then interfering on a screen to produce a pattern of bright and dark fringes.]
2018 · Paper 1 · Q11(c) · p.9
Explain how information is transmitted using optical fibres. [Image: Map of Europe showing locations of LOFAR stations.]
2018 · Paper 1 · Q3 · 40 marks · p.3
A student used a narrow beam of monochromatic light and a diffraction grating to determine λ, the wavelength of the monochromatic light. The following data were recorded. φ, the angle between the two first order images = 34.1° The number of lines per mm on the diffraction grating = 500 Draw a labelled diagram of the apparatus that the student used in this experiment. Describe how the angle between the two first order images was obtained. Calculate the wavelength of the beam of light. Describe the effect on the size of the angle φ, the angle between the two first order images, if the diffraction grating above was replaced with a diffraction grating of 80 lines per mm. Hence determine which grating would give a more accurate value for λ. Justify your answer. What would the student observe if the source of monochromatic light was replaced with a source of white light?
Marking scheme
screen, diffraction grating, laser // spectrometer, diffraction grating, sodium lamp(3×2) S₁ between grating and screen // record θ₁ at n=1 to left S₂ between first order images // record θ₂ at n=1 to right (3) correct method of calculating d or θ (3) d = 2 × 10⁻⁶ (3) θ = 17.05° (3) nλ = d sin θ (3) λ = 5.86 × 10⁻⁷m (3) Ø decreases (3) 500 lines per mm grating (3) larger measurements give smaller percentage error (3) spectrum (4)
2018 · Paper 1 · Q9(ii) · p.7
Using his triangle or otherwise (i) list the primary colours of light, (ii) name a pair of complementary colours of light. [Image: A portrait of James Clerk Maxwell.]
Marking scheme
any primary and secondary colour (3) correct combination (3)
2018 · Paper 1 · Q9(i) · p.7
Using his triangle or otherwise (i) list the primary colours of light, (ii) name a pair of complementary colours of light. [Image: A portrait of James Clerk Maxwell.]
Marking scheme
red, green, blue (3×1)
2017 · Paper 1 · Q7 · 56 marks · p.6
Colour filters and polarising filters can be used to enhance photographs. We see objects because light reflects from them. What is reflection? What primary colours of light (i) are absorbed and (ii) are reflected when white light shines on a red book? What colour would the red book appear to be if colour filters were used so that the book was illuminated (iii) with green light and (iv) with red light? (15) What is polarisation? Describe how polarisation can be demonstrated in the laboratory. Give an application of stress polarisation. (18) Speed cameras use the Doppler effect to calculate the speed of vehicles. Describe, with the aid of a labelled diagram, how the Doppler effect occurs. A source that is emitting a sound wave of a certain frequency is approaching an observer. The frequency observed is 15% more than the frequency of the sound wave emitted. What is the speed of the source? (23) (speed of sound in air = 340 m s¯¹)
Marking scheme
(i) green and blue (3) (ii) red (3)
2016 · Paper 1 · Q3 · p.3
In an experiment to measure the wavelength of monochromatic light, the angles θ between a central bright image (n = 0) and the first and second order images to the left and right were measured. A source of monochromatic light and a diffraction grating of 500 lines per mm were used. Describe, with the aid of a labelled diagram, how the data were obtained. [Table: Order (n) and angles (θ) in degrees. n values: 2 (left), 1 (left), 1 (right), 2 (right). Corresponding θ values: 36.2, 17.2, 17.1, 36.1.] Use the data to calculate (i) the wavelength of the light (ii) the maximum number of images that could be observed. Explain what would happen to the positions of the images if (i) the wavelength of the light was decreased (ii) the diffraction grating was replaced with a diffraction grating of 300 lines per mm.
Marking scheme
[Diagram: Labelled diagram showing experimental setup for measuring wavelength of light. Includes: laser/vapour lamp, grating & screen/grating & spectrometer, correct arrangements. D is labelled as distance from grating to screen. x is labelled as distance from central image to other images.] (3) (3) (3) (3) (3)
2014 · Paper 1 · Q5(e) · p.4
List a pair of complementary colours of light. [Visual aid: None]
2014 · Paper 1 · Q7 · 9 marks · p.5
A laser produces a beam of red light with a wavelength of 709 nm. The beam is incident on a diffraction grating, as shown in the diagram. A diffraction pattern is formed on a screen. A second order image is detected at an angle of 34.6° from the central image. [Diagram: A laser beam incident on a diffraction grating, producing a diffracted beam at angle θ.] Calculate the energy of each photon in the laser beam.
2014 · Paper 1 · Q7(ii) · 9 marks · p.5
and (ii) interference? [Visual aid: None]
2014 · Paper 1 · Q7(i) · 9 marks · p.5
What is meant by the terms (i) diffraction [Visual aid: None]