Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (8)
2025 · Paper 1 · Q5(b)(iv) · p.6
In relation to plastic technology, describe any two of the following: (iv) Elastic memory.
Marking scheme
This describes the ability of a plastic to return to its original shape after being formed. The plastic remembers its original shape and will return to this shape if heated. (Award 5 Marks)
2025 · Paper 1 · Q5(b)(iii) · p.6
In relation to plastic technology, describe any two of the following: (iii) Thermoplastic,
Marking scheme
Thermoplastic is a plastic which softens when heated. (Award 5 Marks)
2025 · Paper 1 · Q5(b)(ii) · p.6
In relation to plastic technology, describe any two of the following: (ii) Laminating,
Marking scheme
Laminating is a bonding process which produces a sheet material manufactured from multiple layers of paper with a top layer of plastic, usually 1.5 mm thick, with a decorative finish. It can be used in flat sheets or heat-formed and bent and adhered to single curved base material. It is commonly referred to by the brand name "Formica." (Award 5 Marks)
2025 · Paper 1 · Q5(b)(i) · p.6
In relation to plastic technology, describe any two of the following: (i) Thermosetting plastic,
Marking scheme
A thermoplastic sheet is clamped in a frame and heat is applied until the sheet begins to sag. At this stage, the mould is lifted up into the plastic sheet and vacuum pressure is applied. This causes the plastic sheet to pull against the mold and form the final shape. After cooling, the mould is lowered and the plastic part is removed from the frame. Excess material is trimmed away. [Diagram: Vacuum forming process showing plastic sheet, heat, mould, vacuum, and final shape.]
2015 · Paper 1 · Q5(c)(iv) · p.4
Explain any three of the following terms associated with plastic technology: Thermosetting plastic.
2015 · Paper 1 · Q5(c)(iii) · p.4
Explain any three of the following terms associated with plastic technology: Thermoforming,
2015 · Paper 1 · Q5(c)(ii) · p.4
Explain any three of the following terms associated with plastic technology: Fibreglass,
2015 · Paper 1 · Q5(c)(i) · p.4
Explain any three of the following terms associated with plastic technology: Thermoplastic,