Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (10)
2025 · Paper 1 · Q6(c)(ii) · p.7
The stunt bike pegs shown opposite were manufactured on a centre lathe. (ii) Describe any one of the processes named by you, at Q6(c)(i) above. [Image: Stunt bike pegs and a close-up of a bicycle handlebar grip.]
Marking scheme
A knurling tool is fitted to the tool post and set at 90° to work. The centre lathe is then turned on at a very slow speed. The knurling tool is moved into the workpiece. Two opposing rollers which press into the piece are moved parallel to the axis of the work producing a diamond pattern on the surface of the material. A lubricant should be used on the workpiece and rollers to help reduce friction. [Image: Knurling tool on a lathe.] (Award 6 Marks)
2025 · Paper 1 · Q6(c)(i) · p.7
The stunt bike pegs shown opposite were manufactured on a centre lathe. (i) Name any two centre lathe processes used to manufacture the stunt bike pegs. [Image: Stunt bike pegs and a close-up of a bicycle handlebar grip.]
Marking scheme
Name: Knurling, Drilling. (Award 2 @ 3 Marks)
2025 · Paper 1 · Q6(b)(iv) · p.7
Explain any three of the following in relation to machining: (iv) Swarf.
Marking scheme
Swarf is the waste material produced when the chip is cut from a workpiece. [Image: Pile of swarf.] (Award 5 Marks)
2025 · Paper 1 · Q6(b)(iii) · p.7
Explain any three of the following in relation to machining: (iii) Depth of cut,
Marking scheme
This is the distance the cutting tool is moved into the workpiece when cutting. [Diagram: Cutting tool showing depth of cut.] (Award 5 Marks)
2025 · Paper 1 · Q6(b)(ii) · p.7
Explain any three of the following in relation to machining: (ii) Clearance angle,
Marking scheme
Without a clearance angle, no cutting would take place. The clearance angle ensures that only the cutting edge of a tool contacts a piece. It provides clearance between the cutting tool face and the workpiece. [Diagram: Cross-section of a cutting tool showing clearance angle.] (Award 5 Marks)
2025 · Paper 1 · Q6(b)(i) · p.7
Explain any three of the following in relation to machining: (i) Cutting fluid,
Marking scheme
Advantage: CAD software enables developers to work more quickly, cut production costs and decrease errors. (Award 6 Marks)
2024 · Paper 1 · Q1(m) · p.2
Explain any one of the following: (i) Swarf, (ii) Taper tap, (iii) Deburring.
Marking scheme
Any one explanation: Award 6 Marks Total (6) Marks
2023 · Paper 1 · Q1(m) · p.2
List two benefits of using cutting fluids when machining. [Image: A metalworking machine with cutting fluid being applied to a workpiece.]
Marking scheme
Two benefits: Provides a better finish on the workpiece being cut. Reduces the temperature of the workpiece and cutting tool being used. (Award 3 + 3 Marks) Total (6) Marks
2019 · Paper 1 · Q1(l)(i) · p.2
Explain Countersink drill.
2014 · Paper 1 · Q6 · 45 marks · p.5
Question 6. (a) The wheel shown is to be turned on a lathe from a 30 mm diameter aluminium bar. Describe any three of the turning operations used to produce the wheel. [Diagram: a wheel with specific dimensions and features to be machined on a lathe.] (b) Explain any three of the following: (i) Centre drill, (ii) Rake angle, (iii) Knurling, (iv) Clearance angle. (c) A part for a centre lathe is shown opposite. (i) Name this lathe part. [Image: a part of a centre lathe, likely the tailstock or headstock.] (ii) Describe two operations that can be performed on a centre lathe using the part shown. (iii) State one safety precaution to be observed when using this lathe part. OR (c) A CNC lathe is shown below. [Image: a CNC lathe.] (i) What do the letters CNC stand for? (ii) Describe one advantage of a CNC lathe over a manual lathe. (iii) State one safety precaution to be observed when operating a CNC lathe.