Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2019 · Paper 1 · Q3(b)(ii) · p.4
Describe each of the following with regard to heat treatment: Work hardening.
2019 · Paper 1 · Q3(b)(i) · p.4
Describe each of the following with regard to heat treatment: Quenching;
2018 · Paper 1 · Q3(a) · p.4
(i) During a heat treatment process carbon steel is cooled quickly from a temperature of 900°C. Name this heat treatment process and state the mechanical property associated with it. (ii) During a heat treatment process carbon steel is cooled slowly from a temperature of 900°C. Name this heat treatment process and state the mechanical property associated with it.
Marking scheme
(i) Name: Hardening (5 marks) Property: Very hard and brittle, will break / shatter easily. (5 marks) (ii) Name: Annealing (5 marks) Property: Very soft and malleable, easy to bend / shape. (5 marks)
2017 · Paper 1 · Q3(b)(ii) · p.4
Explain why it is necessary to temper the point of the centre punch shown.
Marking scheme
The point of the centre punch is tempered to reduce the brittleness and increase the toughness of the point. [Explanation Award 1 @ 7 marks Total (7)]
2017 · Paper 1 · Q3(b)(i) · p.4
Describe how the point of the centre punch shown is hardened and tempered. [Visual aid: Image: a centre punch with the tip highlighted and labelled 'Point'.]
Marking scheme
Work hardening: When a metal is hammered or shaped when cold it becomes hard and brittle at the point where the cold - working occurs. Some metals are prone to work hardening, copper and aluminium are typical examples where hardness values can be increased by cold working. [Description Award 2 @ 4 Marks Total (8)]
2017 · Paper 1 · Q3(a)(i) · p.4
Describe how to carry out each of the following heat treatment processes: Case hardening;
Marking scheme
Case hardening is a method of making low carbon steel very hard on the outside while leaving its centre tough. Low carbon steel may be case hardened by first increasing the amount of carbon in the outer surface by 'carburising'. Carburising is carried out by heating the steel to a cherry red and allowing it to cool in a carbon rich material. The steel part will now have a skin or ‘case' rich in carbon. The part is then heated to a cherry red and quenched, producing a hardened skin with a tough core. [Description Award 2 @ 6 marks Total (12)]
2016 · Paper 1 · Q3(a) · 45 marks · p.3
(a) (i) In relation to the properties of metals, explain the difference between hardening and annealing. (ii) Describe how to carry out each of the following heat treatment processes: Hardening, Annealing.
2015 · Paper 1 · Q3(d) · p.3
Outline the effects of using each of the following, when cooling metals during heat treatment: Water Oil.
2015 · Paper 1 · Q3(b) · p.3
Describe how the head of the engineering hammer shown could be hardened and tempered. [Image: An engineering hammer.]
2015 · Paper 1 · Q3(a)(iii) · p.3
Explain any two of the following: Work hardening.
2015 · Paper 1 · Q3(a)(ii) · p.3
Explain any two of the following: Annealing,
2015 · Paper 1 · Q3(a)(i) · p.3
Explain any two of the following: Case hardening,