Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (6)
2023 · Paper 1 · Q2(b)(iii) · p.3
With the aid of a labelled diagram, describe the operation of any one of the following furnaces: Electric arc furnace.
Marking scheme
Describe: Charge is cold scrap iron/steel, lime, and carbon. Heat from electric arc between electrodes and charge. Lime combines with impurities to form slag. Slag removed through back door. Furnace tilted to tap molten steel. [Diagram: Electric arc furnace showing furnace lid, carbon electrodes, back door for removing slag, tilting rollers, charge, and tapping spout.] (Award 6 Marks) Labelled Diagram (Award 6 Marks) Total (12) Marks
2023 · Paper 1 · Q2(b)(ii) · p.3
With the aid of a labelled diagram, describe the operation of any one of the following furnaces: Basic oxygen furnace,
Marking scheme
Describe: Charge consists of scrap iron/steel, lime, and molten pig iron. Oxygen blown from water-cooled lance oxidizes impurities, forming slag. Steel poured through tapping hole, followed by slag. [Diagram: Basic oxygen furnace showing water-cooled oxygen lance, fume hood, tapping hole, refractory lining, molten metal, and slag.] (Award 6 Marks) Labelled Diagram (Award 6 Marks) Total (12) Marks
2023 · Paper 1 · Q2(b)(i) · p.3
With the aid of a labelled diagram, describe the operation of any one of the following furnaces: Blast furnace,
Marking scheme
Describe: Iron ore, coke, and limestone are fed into the top of the furnace. Coke burns, producing CO which combines with oxygen in ore, leaving iron. Limestone combines with impurities to form slag. Molten iron collects at the bottom and is tapped off. Slag floats on top and is tapped off. [Diagram: Blast furnace showing charge, double bell, stack, refractory lining, tuyere, gas, molten iron, slag, and temperatures at different levels.] (Award 6 Marks) Labelled Diagram (Award 6 Marks) Total (12) Marks
2018 · Paper 1 · Q2(b) · p.3
Select one of the furnaces shown at 2(a) above and answer each of the following: (i) Draw a diagram of the furnace and label the main parts; (ii) Name the materials in the charge; (iii) Describe how the metal is removed from the furnace.
Marking scheme
[Diagram of Blast furnace with labels: Charge, Double bell, Tuyere, Molten Iron, Slag] (5 marks) [Diagram of Electric arc furnace with labels: Furnace lid, Carbon electrodes, Tapping spout, Inspection door, Charge, Tilting rollers] (5 marks) [Diagram of Basic oxygen furnace with labels: Fume hood, Water cooled oxygen lance, Refractory lining, Pouring hole, Slag, Steel shell, Molten steel] (5 marks)
2017 · Paper 1 · Q2(a)(ii) · p.3
With the aid of a suitable diagram, describe the operation of one of the furnaces listed at Q2(a)(i) above.
Marking scheme
Blast Furnace: Iron ore, coke and limestone provide the charge and are fed in through the top of the furnace. As the coke burns, carbon monoxide is produced, and combines with the oxygen in the ore, leaving iron. The limestone combines with impurities to form slag. The molten iron falls to the bottom of the furnace where it is tapped off from time to time. The slag floats above the molten iron and is tapped off as required. Cupola furnace: Pig iron and scrap steel or cast iron, together with other elements are the raw materials. Similar to the blast furnace, the cupola furnace is coke-fired with limestone acting as a flux to trap the impurities into slag. The molten cast iron is tapped from the bottom of the furnace and cast into moulds of different shapes and sizes as required. [Description Award 1 @ 10 Marks Total (10) Marks]
2016 · Paper 1 · Q2(c) · p.3
With the aid of a labelled diagram, describe the operation of one of the furnaces identified at 2(b) above.