Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2023 · Paper 1 · Q1(k) · p.3
State two benefits of using the wireless charging station shown opposite. [Visual aid: Image: a wireless charging station with a phone and earbuds.]
Marking scheme
Charging is completed without trailing leads, phone connections are not subjected to wear, tidy storage, this unit charges multiple devices, etc. 3+2
2022 · Paper 1 · Q9(c) · p.11
“Qi” is the wireless charging standard widely adopted by the largest and most well-known technology manufacturers in the world. [Image: a smartphone being wirelessly charged on a charging pad, displaying 'Charging... 75%'.]
Marking scheme
(iii) Bevel gears are most often used to transmit power at a right angle. The axes of the two bevel gear shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart. [Image: A pair of bevel gears, showing their conical teeth.] (iv) A crank and slider mechanism converts rotating motion at the crank to reciprocating motion of a slider via the connecting rod. [Diagram: A diagram of a crank and slider mechanism. It shows a crank rotating, a connecting rod, and a slider moving back and forth.] (v) Spur gears are the most common type of gear. They have straight teeth that are produced parallel to the axis of the gear. Helical Gears have teeth that are set on an angle to the gear axis. Since the teeth engage more gradually, they have a smoother and quieter operation than spur gears. [Image: Two gears. The left gear has straight teeth labelled 'Spur gear'. The right gear has teeth angled to the axis labelled 'Helical gear'.] (Any three) 6 + 6 + 6 marks (c) (i) The use of a worm and worm wheel mechanism would provide a drive mechanism for the ATV. The drive motor is attached to the worm and the worm wheel and shaft is connected to the drive tracks on both sides. This also provides for speed reduction and increased torque. A variable resistor can be added to the circuit to vary the speed of the motor and in turn the output shaft. [Image: A diagram showing a motor connected to a worm, which drives a worm wheel. The worm wheel is connected to an ATV wheel.] (8 marks)