Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (6)
2026 · Paper 1 · Q6(b)(ii) · p.8
Identify two advantages of using the welding helmet shown opposite. [Image: A welding helmet.]
Marking scheme
The lens darkens instantly when the arc is struck, protecting eyes from harmful light without the need to flip the helmet manually. Welders can keep the helmet down between welds, saving time and maintaining positioning without interruptions, therefore increasing productivity. Clear visibility before and after the weld helps with precise alignment and setup. The welder also has both hands free without the need to hold a welding shield. [Image: A photograph of a welding helmet.]
2022 · Paper 1 · Q6(b)(ii) · p.8
Explain two safety hazards associated with resistance spot welding.
2021 · Paper 1 · Q6(b)(ii) · p.8
Outline three safety precautions to be observed when operating a welding unit.
Marking scheme
Safety precautions to be observed when operating a welding unit: • Wear a welding mask to prevent “arc-eye” and facial burning. • Wear heavy gloves to prevent hands from being burned. • Have a ventilation system in place to deal with the toxic fumes. • Have all electrical units earthed and connections properly insulated. (2+2+2)
2020 · Paper 1 · Q5(a)(ii) · p.8
Outline three safety precautions to be observed when operating a welding unit. [Image: A Polaris RZR all-terrain vehicle, highlighting its tubular roll cage.]
Marking scheme
Any three @ 2 + 2 + 2
2018 · Paper 1 · Q5(a)(ii) · p.8
Outline three safety features integrated into the welding technique selected.
Marking scheme
MIG welding is a semi-automated process with a predetermined wire feed, this eliminates the need for adjustment during welding. The wire feed is shielded by the torch. MIG welders are supplied with an appropriate mask to protect against uv light, heat and hot metal. Welding booths are designed to be ventilated and protect others. Anti-spatter compound on the nozzle and gun will reduce spatter. Gas cylinders are secured at the machine. (Three safety features @ 2 + 2 + 2 marks)
2014 · Paper 1 · Q5(a)(iii) · p.8
With reference to manual metal arc welding, answer any three of the following: Outline three safety precautions to be observed during manual metal arc welding.