Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (9)
2026 · Paper 1 · Q6(a)(ii) · p.8
Select a suitable welding process for the fabrication of the aluminum truss and give one reason for your choice.
Marking scheme
Name 2 marks, Reason 2 marks: Suitable welding process: Tungsten Inert Gas (TIG) welding. Reason: TIG welding is suitable for aluminium and offers precise heat control, therefore minimising warping and burn-through of the thin-walled tubes. TIG produces clean, high-quality welds which are strong and aesthetically pleasing.
2020 · Paper 1 · Q5(a)(i) · p.8
Describe, with the aid of a diagram(s), a suitable welding process to manufacture the tubular steel roll cage shown. [Image: A Polaris RZR all-terrain vehicle, highlighting its tubular roll cage.]
Marking scheme
MIG Welding: is a semi-automatic process. A consumable bare wire electrode is fed continuously into the weld pool area through the welding torch. An inert gas, such as Argon, creates a protective shield around the weld pool giving a fluxing action. The feed rate and flow rate of the gas are set by the operator. This allows the operator to guide the torch along the weld once the arc is generated between the electrode and the work. MIG welding does not produce a slag on the weld. [Diagram: MIG welding setup showing wire reel, power supply, gas cylinder, welder unit, MIG gun, workpiece, and molten weld pool with gas shield.]
2019 · Paper 1 · Q5(b) · p.8
Answer any three of the following: (i) Explain the function of a rectifier in arc welding. (ii) Describe how an acetylene cylinder is filled under low pressure. (iii) Describe, with the aid of a diagram, the process of friction welding. [Diagram: illustration of the friction welding process.] (iv) Explain how the flux coating prevents oxidation in manual metal arc welding. (v) Outline two safety hazards associated with metal inert gas (MIG) welding in a school workshop.
2018 · Paper 1 · Q5(a)(i) · p.8
Describe, with the aid of a diagram(s), a suitable welding process to manufacture the mild steel frame shown.
Marking scheme
Submerged Arc Welding: In submerged arc welding, a bare wire electrode is used. It is fed automatically from a spool and generates an electric arc to heat the metal. The flux, in powder form, is fed from a hopper to completely cover the joint and the tip of the electrode. The arc creates the heat to melt the joint, flux and electrode. A slag is formed to provide a protective coating for the weld. The excess flux powder can be collected and used again. Submerged arc welding is a fully automated process. Applications: used for large scale straight line welds such as steel reinforcing beams, shipbuilding and bridge construction. [Diagram: Shows a submerged arc welding setup with a hopper for flux, electrode, and a control unit.]
2016 · Paper 1 · Q5(b) · p.8
Answer any three of the following: (i) Outline two functions of the flux coating used in manual metal arc welding. (ii) Describe the principle of resistance spot welding. (iii) Describe three hazards associated with the use of welding equipment in a school engineering room. (iv) Explain why submerged arc welding (SAW) is suitable for welding steel girders. (v) Outline two advantages of multi-run welds.
2015 · Paper 1 · Q1(k) · p.3
Identify one automatic welding process.
2015 · Paper 1 · Q5(b)(i) · p.8
Select a suitable welding process for joining the frame and outline one reason for your selection.
2014 · Paper 1 · Q5(b)(ii) · p.8
High performance car exhaust pipes are often manufactured in stainless steel and joined by welding. Describe, with the aid of a suitable diagram, the main features of this welding process. [Image: A high-performance car exhaust pipe.]
2014 · Paper 1 · Q5(b)(i) · p.8
High performance car exhaust pipes are often manufactured in stainless steel and joined by welding. Name a suitable welding process for an exhaust pipe. [Image: A high-performance car exhaust pipe.]