Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2021 · Paper 1 · Q7(b)(ii) · p.9
Describe the manufacturing process of plastic pultrusion shown below. [Diagram: A schematic of the pultrusion process showing fibre creel, guide plate, preformer, resin bath, forming and curing die, pulling mechanism, and cut-off.]
Marking scheme
Plastic pultrusion is similar to extrusion and is associated mainly with thermosetting polymers. In the standard pultrusion process the reinforcement materials like fibres are impregnated with resin, possibly followed by a separate preforming system, and pulled through a heated stationary die where the resin undergoes polymerisation. The impregnation is either done by pulling the reinforcement through a bath or by injecting the resin into an injection chamber which typically is connected to the die. Many resin types may be used in pultrusion including polyester, polyurethane, vinylester and epoxy. Resin provides the resistance to the environment, (i.e., the corrosion resistance, the UV resistance, the impact resistance, etc.) and the glass provides strength, in addition to safety from fire.