Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2022 · Paper 1 · Q7(b)(ii) · p.9
Explain, with an example, the term copolymerisation.
Marking scheme
(i) Vacuum forming: A thermoplastic sheet is clamped in a frame and heat is applied until the sheet begins to sag. At this stage, the mould is lifted up into the plastic sheet and vacuum pressure is applied. This causes the plastic sheet to pull against the mold and form the final shape. After cooling, the mould is lowered and the plastic part is removed from the frame. Excess material is trimmed away. [Diagram: A diagram showing the vacuum forming process. A plastic sheet is clamped over a mould. Vacuum is applied, pulling the sheet down into the mould shape.] (ii) Properties of expanded polystyrene: • Dissipates shock. • Lightweight. • Thermal insulation. EPS has very low thermal conductivity. • Moisture resistance. • Durability. • Environmental safety. (8 marks) (iii) Suggested plastic is nylon. Nylon is strong, wear resistant and can be made into woven and flexible straps. (2+2 marks)
2022 · Paper 1 · Q7(b)(i) · p.9
Outline the function of a catalyst in the addition polymerisation process.