Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (3)
2026 · Paper 1 · Q7(a)(i) · p.9
The outdoor goal posts shown consist of thermoplastic tubing and corner joints. Name a suitable process used to manufacture the thermoplastic tubing and a suitable process used to manufacture the corner joints. [Image: Outdoor goal posts showing tubing and corner joints.]
Marking scheme
2+2 marks: Thermoplastic tubes: Extrusion. Thermoplastic Joints: Injection moulding.
2018 · Paper 1 · Q6(c)(ii) · p.9
Explain the polymer manufacturing process of extrusion and give one reason for using this process to produce elastomer seals.
Marking scheme
Elastomer: A group of polymers consisting of linear chains that are coiled, entangled and are subject to minimal cross-linking. This irregular internal structure and bonding arrangement allows these materials to be very elastic at room temperature. Extrusion: Granulated thermoplastic polymer is fed into the barrel from the hopper. The screw moves the polymer forward. Heaters melt the polymer to liquid. As the screw continues to rotate, the polymer is pushed out through the die to give the required shape. Typical products include gutters, fascia, pipes and rods. [Diagram: Shows an extrusion process with a hopper, screw, heaters, die, and cold water in/out. Labels indicate 'granules', 'heater', 'hopper', 'Die', 'Cold water in', 'Extruded solid', 'Water out'.] Explain: extrusion gives a long continuous product which can be cut to length. Reason: 2 marks
2018 · Paper 1 · Q6(a)(i) · p.9
Name and describe, with the aid of a diagram, a polymer manufacturing process suitable for the manufacture of the roof box.
Marking scheme
Injection Moulding: This is an efficient method of shaping thermoplastics of complicated shapes and various cross sections in large quantities. [Diagram: Shows an injection moulding machine with a hopper containing plastic, a motor-driven screw, heaters, and a split mould cavity.] The mould has a hollowed out shape of the roof box. With the split mould firmly clamped under pressure, plastic granules are fed from the hopper. These plastic granules are then made into a molten plastic liquid using heat, friction and force. Pressure is applied after the molten plastic material has been injected into the mould to make sure that all of cavities and spaces have been filled. In the final stage of the process as the screw begins moving back for the next moulding the mould is opened. The opening of the mould allows the finished plastic moulding of the casing to be ejected.