Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2019 · Paper 1 · Q2(c)(ii) · p.5
Describe, with the aid of a diagram(s), one suitable radiography (x-ray) NDT method. [Diagram(s): illustration(s) of radiography (x-ray) NDT setup and results.]
Marking scheme
Radiography (x-ray) test. X-ray radiation penetrates materials and produce an internal photographic image of the test piece. Electrons are released by heating the cathode to a high temperature. A high DC voltage speeds up the electrons which are aimed at the anode. The electrons penetrate the anode and the energy is given off as X-rays. The anode reflects the X-rays to the test piece and an image plate is used to capture the internal image. Used for the inspection of welds. [Diagram: Radiography test showing a radiation source, thin metal, test object with a defect, film, and a darkened area when processed.] (8 marks)
2019 · Paper 1 · Q2(c)(i) · p.5
Outline one application for each of the following methods of NDT: • Visual inspection • Dye penetrant testing • Magnetic particle testing • Eddy current testing.
Marking scheme
Visual inspection: sizeable surface defects. Dye penetrant testing: surface defects. Magnetic particle test: surface cracks on ferrous metal objects. Eddy currents: non-ferrous metals where the flaw is near the surface. (2+2+2+2 marks)
2019 · Paper 1 · Q2(c) · p.5
Non-destructive testing (NDT) is critical in the design and maintenance of a wide range of components. [Image: a component being inspected with a dye penetrant kit.]
2018 · Paper 1 · Q2(c)(ii) · p.5
Describe, with the aid of a diagram, one suitable non-destructive test to examine the propeller for flaws near the surface of the bronze casting.
Marking scheme
Eddy Current Testing is the most suitable NDT for non-ferrous metals where the flaw is near the surface. The alternating current flowing through the coil at a chosen frequency generates a magnetic field around the coil (a). When the coil is placed close to an electrically conductive material, eddy currents are induced in the material (b). If a flaw in the conductive material disturbs the eddy current circulation (c), the magnetic field with the probe is changed and a defect signal can be read by measuring the variation. [Diagram: Shows three stages of eddy current testing. (a) A coil generating a magnetic field. (b) Eddy currents induced in a conductive material. (c) A flaw disturbing the eddy current circulation and changing the magnetic field.]
2018 · Paper 1 · Q2(c)(i) · p.5
Outline one economic benefit and one safety benefit of using non-destructive testing for ship propellers.
Marking scheme
Economic benefits of NDT: Non-destructive testing allows materials to be tested to ensure conformity, metals are not rejected. Tested specimens are not discarded. The test specimens are not broken. Safety benefits of NDT: Internal and external flaws are examined using NDT. Well-designed objects will not fail as objects are tested for conformance by NDT. Objects are not weakened by the testing process.
2018 · Paper 1 · Q2(c) · p.5
Bronze alloys are used to cast propellers for large ships. As part of a quality control procedure, the bronze propeller shown is non-destructively tested before use. [Image: A bronze ship propeller.]
2017 · Paper 1 · Q2(c)(ii) · p.5
Outline two safety hazards associated with the use of X-ray testing equipment. [Visual aid: Image: A portable X-ray testing device.]
Marking scheme
Safety hazards associated with the use of x-ray testing equipment would include the following: • Shielding: Use appropriate shielding at all test sites and on all persons. • Distance: Maintain adequate distance between radioactive sources and persons. • Duration: Minimize time spent near or within radiation fields. • Quantity: Utilise the smallest amount of radioactive material possible to accomplish the job at hand.
2017 · Paper 1 · Q2(c)(i) · p.5
A portable X-ray testing device is shown. Describe, with the aid of a diagram, the principles of X-ray testing. [Image: A portable X-ray testing device with control panel and X-ray emitter.]
Marking scheme
X-ray test X-ray radiation penetrates materials and produce an internal photographic image of the test piece. Electrons are released by heating the cathode to a high temperature. A high DC voltage speeds up the electrons which are aimed at the anode. The electrons penetrate the anode and the energy is given off as X-rays. The anode reflects the X-rays to the test piece and an image plate is used to capture the internal image. Used for the inspection of welds. [Diagram: X-ray testing setup showing a radiation source, a test object (thin metal), a defect within the object, and a film. The X-rays pass through the object and expose the film, with the defect appearing as a lighter area on the processed film.]
2016 · Paper 1 · Q2(c) · p.5
An eddy current non-destructive testing device is shown. [Image: Eddy current testing device]. (i) Describe, with the aid of a diagram(s), the principle of eddy current testing. (ii) Outline two reasons why non-destructive tests are used during the manufacture of an engine crankshaft.
2015 · Paper 1 · Q2(c)(ii) · p.5
Describe, with the aid of a diagram, the non-destructive test to examine for internal flaws identified at (c) (i) above.
2015 · Paper 1 · Q2(c)(i) · p.5
Identify one non-destructive test to examine the wheel for surface flaws and one non-destructive test for internal flaws.
2014 · Paper 1 · Q2(c)(ii) · p.5
Describe, with the aid of a diagram, a non-destructive test suitable for testing weld quality. [Image: A close-up photograph of a weld seam showing several pores and inclusions, indicating poor quality.]