Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2023 · Paper 1 · Q6(a)(ii) · p.8
Explain two reasons for the use of MIG welding in the restoration of classic cars. [Visual aid: Image: a classic car being restored with sheet metal being welded.]
Marking scheme
Reasons for MIG welding: • MIG will weld thin sheet steel without burning holes in the metal. Most classic cars are made from sheet steel. • MIG can be used for a variety of metals and thicknesses. • It is relatively easy to use. • MIG gives a clean weld with minimal spatter. 3+3
2023 · Paper 1 · Q6(a)(i) · p.8
Describe, with the aid of a diagram, the principles of MIG welding.
Marking scheme
MIG Welding MIG Welding is a semi-automatic process. A consumable bare wire electrode is fed continuously into the weld pool area through the welding torch. An inert gas, such as Argon, creates a protective shield around the weld pool giving a fluxing action. The feed rate and flow rate of the gas are set by the operator. This allows the operator to guide the torch along the weld once the arc is generated between the electrode and the work. MIG welding does not produce a slag on the weld. [Diagram: MIG welding setup showing a wire reel feeding a wire-fed electrode through a MIG gun. A gas cylinder supplies inert gas. An earth clamp is attached to the workpiece. An arc is shown between the electrode and the molten weld pool. Labels: Wire reel, Gas cylinder, Power supply, Wire-fed electrode, Welder unit, Arc, Gas shield, MIG gun, Arc, Earth clamp, Workpiece, Molten weld pool.] 10