Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2018 · Paper 1 · Q8(b) · p.11
Answer any three of the following: (i) Explain how a stepped cone pulley can change the speed of a machine. (ii) Outline how a cam and follower mechanism may be used in a child's toy. (iii) Give two applications for a universal joint. (iv) Explain how a crank and slider mechanism may operate an electric knife. (v) Outline the operation of a single acting pneumatic cylinder.
2018 · Paper 1 · Q8(a)(ii) · p.11
Explain, with the aid of a diagram, how the side rails may be collapsed to allow a patient ease of access to the bed.
Marking scheme
The side rails of the bed can easily be collapsed using a parallel linkage mechanism. This will allow all the parallel vertical links to fall to one side thus lowering the side rails. [Diagram: Shows side rails of a bed collapsing using a parallel linkage mechanism. Labels indicate 'Vertical links'.]
2017 · Paper 1 · Q8(c)(ii) · p.11
Describe, with the aid of a diagram, a mechanism which will allow the ramp be automated. [Image: A car with a sliding door, adapted for wheelchair access, showing a ramp.]
Marking scheme
The use a worm and worm wheel drive would be a suitable solution for the automatic ramp of the car. This would provide an increase in torque and a speed reduction. A low-cost motor could also be used with this mechanism. The worm wheel could be attached to the pivot hinge of the ramp allowing it to be rotated into position. A DPDT switch would provide the option for forward and reverse drive of the ramp while a variable resistor could be used to vary the speed of the drive. [Diagram: A worm and worm wheel drive. A motor (M) is shown connected to a DPDT switch and a variable resistor.] Servo motors and Stepper motor could also be considered for both parts of the question.
2017 · Paper 1 · Q8(c)(i) · p.11
A car suitable for wheelchair users is shown opposite. Describe, with the aid of a diagram, a suitable mechanism to allow the sliding door to open. [Image: A car with a sliding door, adapted for wheelchair access.]
Marking scheme
Suggested solutions, suitable alternatives are considered The use of a toothed belt and pulley mechanism could operate a sliding door(s) for the car. As the motor rotates the belt will also rotate on the pulleys and link assembly brackets attached to the top and bottom of the belt will move the doors in opposite directions. [Diagram: A car sliding door mechanism showing a motor gearbox, control box, toothed belt, pulleys, rail, roller bracket, stopper, and wiring terminal.]
2017 · Paper 1 · Q8(b)(iii) · p.11
Answer any three of the following: Outline a suitable use for a cam and follower mechanism.
Marking scheme
Helical gears offer a refinement over spur gears. The teeth are not parallel to the axis of rotation, but are set at an angle. The angled teeth run more smoothly and quietly, giving greater strength also. Uses include High Speeds needed, large power transmission and low noise. [Image: Two helical gears meshing.]
2017 · Paper 1 · Q8(b)(ii) · p.11
Answer any three of the following: State two advantages of helical gears over spur gears.
Marking scheme
Mechanisms which will transmit motion through 90° include: • Worm and worm gear • Bevel gears
2017 · Paper 1 · Q8(b)(i) · p.11
Answer any three of the following: Describe a mechanism that transmits motion through 90°.
Marking scheme
Other uses for a ratchet and pawl mechanism include: • Clothes line • Ratchet straps • Hoists 4 + 4
2017 · Paper 1 · Q8(a)(ii) · p.11
Other than a turnstile, identify two applications for the mechanism described by you in Q8(a)(i) above. [Image: An entrance turnstile.]
2017 · Paper 1 · Q8(a)(i) · p.11
Entrance turnstiles are used to control access to train stations and sports stadiums. Describe, with the aid of a diagram, a suitable mechanism which allows a turnstile to rotate in one direction only. [Image: An entrance turnstile.]
Marking scheme
A capacitor is used to store charge which can be released when needed. They are used for timer circuits, power supplies, etc.
2016 · Paper 1 · Q8(a) · p.11
Lifts which are suitable for wheelchair users are often provided in both public and private buildings to improve accessibility. The scissor lift mechanism shown can be used to operate a wheelchair lift. [Diagram: Scissor lift mechanism]. (i) Describe, with the aid of a diagram(s), the operation of this type of lift mechanism. (ii) Outline one other mechanism that could be used to operate a wheelchair lift.
2015 · Paper 1 · Q1(l) · p.3
The roller coaster seat shown opposite is fitted with a safety harness, to securely hold an individual when the roller coaster is in use. Identify a suitable mechanism which will ensure that the safety harness remains in a closed position when in use. [Image: A roller coaster seat with a safety harness.]
2015 · Paper 1 · Q8(a) · p.11
A worm and worm wheel mechanism is used to tension the volleyball net shown opposite. [Image: A volleyball net with a tensioning mechanism involving a worm and worm wheel.]