Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2018 · Paper 1 · Q7(b) · p.10
Answer any three of the following: (i) Explain the difference between a dovetail cutter and a slot drill in milling. (ii) Outline one reason for balancing a grinding wheel. (iii) Explain why a three-jaw chuck is not suitable for holding a square bar. (iv) Describe one method of holding a work piece securely when surface grinding. (v) Describe the use of a fixed steady when operating a lathe.
2018 · Paper 1 · Q7(a)(ii) · p.10
Explain the impact of continuous chip formation on: Surface finish, Automated machinery.
Marking scheme
A continuous chip will leave a smooth finish on soft ductile materials, such as aluminium or copper. Continuous chips are more likely to produce a stable cutting action which results in a good surface finish. For automated machinery, continuous chip formation is a problem for the cutting tool and the piece being machined as the chip can wrap around the workpiece and get in the way of the cutting process.
2017 · Paper 1 · Q7(c)(ii) · p.10
State one advantage and one disadvantage of magnetic chucks. [Image: A magnetic chuck.]
Marking scheme
Advantages of using magnetic chucks: • They provide quick clamping with a firm grip. • They can accommodate large batches of workpieces. • They can often accommodate unusual workpiece shapes. Disadvantages of using magnetic chucks: • The metals need to be magnetic. • The workpiece must have a flat surface and be able to make good contact with the chuck.
2017 · Paper 1 · Q7(c)(i) · p.10
Magnetic chucks, similar to the one shown, are used to hold workpieces during various machining processes. Explain, with the aid of a diagram(s), the basic operation of a magnetic chuck. [Image: A magnetic chuck.]
Marking scheme
Magnetic chuck [Diagram: A magnetic chuck showing a top plate, magnets, and pole inserts. Two examples are shown: one with a workpiece held on it, and another without.] Traditionally associated with grinding machines, the magnetic chuck has been adapted for use with other machines. Used for holding ferromagnetic workpieces, a magnetic chuck consists of an accurately centered permanent magnet face. Electromagnets or permanent magnets are brought into contact with fixed ferrous plates, or pole pieces, contained within a housing. These pole pieces are usually flush with the housing surface. The part (workpiece) to be held forms the closing of the magnetic loop or path, onto those fixed plates, providing a secure anchor for the workpiece. There are two basic types of magnetic chucks now available (electromagnetic and permanent), but they come in a variety of sizes, shapes and modifications to suit many different applications. Electromagnetic chucks are charged by an electrical current while permanent-type magnetic chucks are based on permanent magnets. Both types can be turned on and off.
2017 · Paper 1 · Q7(b)(ii) · p.10
Describe the impact of cutting fluids on: metal cutting machines and metal cutting efficiency. [Image: A metal cutting machine with coolant flow visible.]
Marking scheme
Metal cutting machines: prolong machine life, reduces vibration, maintains tool sharpness, etc. Metal cutting efficiency: makes metal cutting more effective, reduces heat generated, improves finish, etc.
2017 · Paper 1 · Q7(b)(i) · p.10
Cutting fluids are commonly used in metal cutting machines. Identify two types of cutting fluids. [Image: A metal cutting machine with coolant flow visible.]
Marking scheme
Soluble oils, pastes, synthetic fluids, oils, etc.
2017 · Paper 1 · Q7(a)(v) · p.10
Answer any three of the following: Explain the term rancidity in relation to cutting fluids.
Marking scheme
Rancidity of the cutting fluid is caused by bacteria and other microscopic organisms, growing and eventually causing bad odors to form. Most cutting fluids contain bactericides that control growth of bacteria and make fluids more resistant to rancidity. Other ways of preventing rancidity include continuous filtering of the cutting fluid to keep it clean and by keeping the fluid at proper strength.
2017 · Paper 1 · Q7(a)(iv) · p.10
Answer any three of the following: State two advantages of a keyless chuck.
Marking scheme
Keyless chucks eliminate the need for a chuck key to open and close the jaws of the chuck. You simply hand tighten the chuck after inserting the drill bit or cutting tool into the space between the three jaws. Machinists and others who use drill chucks have a tendency to lose chuck keys, so this prevents that from happening; you do not use a chuck key to open or close the jaws of a keyless chuck. Over time the teeth of a keyed chuck can break or chip, making the process of opening and closing a traditional chuck difficult, but keyless chucks do not suffer this fate.
2017 · Paper 1 · Q7(a)(iii) · p.10
Answer any three of the following: Describe the function of a reamer in machining.
Marking scheme
A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides. The process of enlarging the hole is called reaming.
2017 · Paper 1 · Q7(a)(ii) · p.10
Answer any three of the following: Outline the difference between loading and glazing of grinding wheels.
Marking scheme
Loading: a grinding wheel becomes loaded with small particles when grinding debris becomes trapped in the space between the abrasive grains and the wheel. This will cause overheating of the work piece. Glazing: the grinding wheel has a shiny appearance as the abrasive particles have lost their edge and failed to break away from the wheel. The grinding wheel will not cut effectively. These faults are caused by inappropriate choice of grinding wheel for the material being ground.
2016 · Paper 1 · Q7(a) · p.10
Answer any three of the following: (i) Identify three safety features integrated into a lathe. (ii) Explain how measurement errors may occur when using digital vernier calipers. (iii) Outline one use of a vee-block and clamp. (iv) Distinguish between a pilot hole and a tapping size hole. (v) Explain the difference between a rake angle and a clearance angle in cutting tools.
2014 · Paper 1 · Q7(a)(ii) · p.10
Answer any three of the following: Describe the formation of a built-up edge on a cutting tool.