Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2025 · Paper 1 · Q6(b)(i) · p.8
Identify two necessary steps in the preparation of a joint for welding.
Marking scheme
Clean the surfaces to be welded by removing dirt, grease, oil and rust. Use a wire brush, grinder or chemical cleaner. Ensure there are no sharp edges or burrs on the metal pieces by grinding or filing them down. Ensure the metal pieces are correctly aligned and close fitting, for thicker materials, bevel the edges using a grinder or cutting tool. Ensure that the angles and alignment are accurate and secure the workpieces using clamps, jigs, or fixtures. Some metals, like high-carbon steel or thick materials, may require preheating to prevent cracking. Use a torch or heating element to bring the metal to the desired temperature. (10)