Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2017 · Paper 1 · Q3(c)(ii) · p.6
Describe a case hardening process. [Image: Gears from a drive or transmission system.]
Marking scheme
Pack Method Carburising [Diagram: A sealed steel container with a component to be carburised inside. Activated charcoal and carbon monoxide are shown within the container. Arrows indicate heat being applied.] The piece is packed in a box with a carbon rich material such as charcoal and placed in a furnace at 920°C (above UCT). This allows the carbon to diffuse into the piece. The longer the component is in the furnace the greater the depth of penetration of carbon. The result is a very hard coarse outer shell. Grain refining is necessary to prevent cracking and this is done by putting the piece into a bath of molten salt at 780°C for half an hour and then quenching it in water.
2017 · Paper 1 · Q3(c)(i) · p.6
Surface hardening techniques, such as case hardening and induction hardening, are often used as heat treatment processes for drive and transmission systems. Outline two reasons for surface hardening the teeth of the gear wheels. [Image: Gears from a drive or transmission system.]
Marking scheme
Surface hardening the gear wheel teeth will prolong the life of the gears as they will not wear as easily. The surface of the gears will be hard with a softer inner layer to reduce the impact of the brittle outer layer. Gear teeth will maintain their shape longer.
2017 · Paper 1 · Q4(a)(ii) · p.7
With reference to the spring shown, outline two benefits of the age hardening process. [Image: A compression spring.]
Marking scheme
Age hardening of the Beryllium-Copper alloy will provide: • High strength, • Corrosion resistance, • Stability, • Conductivity, • Low creep.
2017 · Paper 1 · Q4(a)(i) · p.7
The compression spring shown is made from a Beryllium-Copper alloy and is age hardened. Describe the process of age hardening. [Image: A compression spring.]
Marking scheme
Age Hardening Age Hardening occurs in certain non-ferrous alloys of aluminium, copper and nickel, as well as some ferrous alloys. The work piece is heated and allowed to soak to dissolve the alloyed particles. Ageing then occurs at room temperature or elevated temperatures depending on the piece. Precipitation of the dissolved particles in the alloy cause distortion of the material lattice thus resulting in the hardening of the metal.
2016 · Paper 1 · Q1(b) · p.3
Identify three quenching media that can be used in the heat treatment of metals.
2016 · Paper 1 · Q3(a) · p.6
The camshaft shown opposite is to be induction hardened as part of a heat treatment procedure. [Image: Camshaft]. (i) Describe, with the aid of a suitable diagram(s), the process of induction hardening. (ii) With reference to the camshaft, outline the benefits of induction hardening.
2015 · Paper 1 · Q3(a)(ii) · p.6
Describe in detail the heat treatment procedure required for a precision carbon steel screwdriver.
2015 · Paper 1 · Q3(a)(i) · p.6
Why is it necessary to carry out a heat treatment procedure on a precision carbon steel screwdriver?
2015 · Paper 1 · Q3(a) · p.6
Precision screwdrivers are used in the disassembly of modern smart phones. [Image: A person using a precision screwdriver to disassemble a smartphone.]
2014 · Paper 1 · Q3(c)(ii) · p.6
The tip of the height gauge shown is to be made from carbon steel. A cast iron surface plate is also shown. Describe, with the aid of a diagram, a suitable heat treatment process for the surface plate. [Image: A height gauge with a sharp tip, and a flat cast iron surface plate.]
2014 · Paper 1 · Q3(c)(i) · p.6
The tip of the height gauge shown is to be made from carbon steel. A cast iron surface plate is also shown. Compare the different heat treatment requirements for the carbon steel tip and the cast iron surface plate. [Image: A height gauge with a sharp tip, and a flat cast iron surface plate.]
2014 · Paper 1 · Q3(a)(i) · p.6
Describe the heat treatment process of normalising.