Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2021 · Paper 1 · Q3(a)(i) · p.5
Brinell hardness test and Vickers hardness test;
Marking scheme
Brinell hardness test: • A hardened Steel or Tungsten Carbide ball indenter is used in this hardness test. • The diameter of the ball may be Ø2.5mm, Ø 5mm or Ø 10mm. • The loading force is in the range of 300N to 30kN. • The indentation shape will be a circle and the diameter of this circle d₁ & d₂ is measured. • Hardness Brinell (HB) number is calculated as follows; HB = Load / d1.d2 • The ball can deform when used on very hard materials. [Diagram: Indentation showing diameter d1 and d2, and a ball indenter.] Vickers hardness test: • A Diamond Square-based pyramid indenter is used in this hardness test. • The angle of the indenter is 136°. • The length of the diagonals (d₁ and d₂) of the indentation are measured. • Hardness Vickers (HV) number is calculated as follows; HV = Load / d1.d2 • The Vickers test is more accurate because it will mark a harder piece easier. • Vickers and Brinell tests can be compared as they have similar hardness ranges. [Diagram: Square-based pyramidal indentor and indentation showing diagonals d1 and d2.]