Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2025 · Paper 1 · Q8(c)(ii) · p.10
Identify the chip formation shown at C and outline how this chip formation impacts on both safety and surface finish. [Diagrams: Metal cutting chips labelled A, B, and C.] [Visual aid: Diagrams: Metal cutting chips labelled A, B, and C.]
Marking scheme
Built-up edge (BUE) is common in machining, particularly in lathe work, where material being cut adheres to the cutting tool, forming a small deposit or "edge" on the tool's tip. This occurs when the pressure and temperature at the cutting zone cause workpiece material to weld to the cutting tool. BUE impacts safety as it increases the risk of tool failure and machine stress, potentially leading to accidents if the tool breaks or the workpiece is ejected. BUE can negatively affect the surface finish of the workpiece, it can leave behind rough or irregular surfaces, resulting in a poor finish with increased roughness. BUE can lead to inaccuracies in the dimensions of the machined part. (8)