Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2021 · Paper 1 · Q4(c)(ii) · p.6
Grey cast iron and white cast iron;
Marking scheme
Grey cast iron is named after its grey fractured surface, which occurs because the graphitic flakes deflect a passing crack and initiate countless new cracks as the material breaks. Grey cast iron results from slow cooling and/or high carbon equivalent. The carbon exists as flakes of graphite. It has a grey appearance when fractured and it is the most commonly used cast iron. Grey cast iron has poor tensile strength and shock resistance but has good compressive strength. It is soft and machinable. White cast iron is named after its white surface when fractured, due to its carbide impurities which allow cracks to pass straight through. White cast iron results from fast cooling and/or low carbon equivalent. The carbon is tied up as cementite. It has a white shiny appearance when fractured and it is used in the impellers of slurry pumps, shell liners and lifter bars in ball mills and in the balls and rings in coal pulverisers. It is hard, brittle and generally not machinable. (Any two @ 8 + 8)