Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (3)
2023 · Paper 1 · Q4(a)(iii) · p.6
Explain one advantage of case hardening over full hardening. [Visual aid: Image: the arbour of a keyless self-tightening chuck.]
Marking scheme
Case hardening gives a hard, abrasion resistant outer surface yet has reduced brittleness due to the softer inner core, it is less likely to break on impact compared to a fully hardened product, etc. 4
2023 · Paper 1 · Q4(a)(ii) · p.6
Outline two reasons for case hardening the arbour of the keyless chuck. [Visual aid: Image: the arbour of a keyless self-tightening chuck.]
Marking scheme
Reasons for case hardening the chuck arbour: • Hard outer shell while softer, tougher inner core. • Warping or distortion, due to rapid cooling of the whole piece is avoided. • Improved wear resistance. • Short processing time (fewer steps involved). • Cost-effective. 2+2
2023 · Paper 1 · Q4(a)(i) · p.6
Describe, with the aid of a diagram, a case hardening process.
Marking scheme
Suggested answer other solutions accepted Pack Method Carburising [Diagram: Cross-section of a sealed steel container filled with activated charcoal and a component to be carburised. Arrows indicate heat input and carbon monoxide (CO) flow.] The piece is packed in a box with a carbon rich material such as charcoal and placed in a furnace at 920°C (above UCT). This allows the carbon to diffuse into the piece. The longer the component is in the furnace the greater the depth of penetration of carbon. The result is a very hard coarse outer shell. Grain refining is necessary to prevent cracking and this is done by putting the piece into a bath of molten salt at 780°C for half an hour and then quenching it in water. 8