Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (3)
2023 · Paper 1 · Q8(a)(ii) · p.10
Outline two methods of preventing a built-up edge when machining. [Visual aid: Image: a metal cutting machine with a workpiece and tool.]
Marking scheme
Methods of preventing a built-up edge • Use of cutting fluids. • Select correct cutting speed for the metal. • Use appropriate machine speeds. • Ensure good condition of the cutting tools in terms of geometry and sharpness. 2+2
2023 · Paper 1 · Q8(a)(i) · p.10
Describe, with the aid of a diagram, the term built-up edge and explain how it occurs.
Marking scheme
Built-up edge: In single point cutting of metals, a built-up edge is an accumulation of material against the rake face which adheres to the tool tip. The cutting tool is separated from the chip by the built-up edge which is caused by incorrect machine speeds for the metal, machine feed rate, cutting fluids, etc. As the built-up edge enlarges, the cutting edge will not cut effectively as the tool cutting angles are compromised. The surface finish will deteriorate and machining will not be smooth. The machine is likely to be subjected to excess vibration. [Diagram: Single point cutting tool showing a built-up edge adhering to the tool tip, causing the cutting edge to be compromised. Labels: Tool, Built-up edge, Uneven surface.] 8
2021 · Paper 1 · Q8(b)(iv) · p.10
Describe, with the aid of a diagram, the formation of a built-up edge in metal cutting.
Marking scheme
Built-up edge: In single point cutting of metals, a built-up edge is an accumulation of material against the rake face which adheres to the tool tip. The cutting tool is separated from the chip by the built-up edge. As the built-up edge enlarges, the cutting edge will not cut effectively as the tool cutting angles are compromised. The surface finish will deteriorate and machining will not be smooth. The machine is likely to be subjected to excess vibration. [Diagram: Single point cutting tool showing the tool, chip, and a built-up edge on the rake face. Labelled 'Built-up edge' and 'Uneven surface'.] (Any three) 6 + 6 + 6