Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2023 · Paper 1 · Q1(a) · p.2
The sketch shows the external wall and timber first floor of a dwelling house. The external wall is a 400 mm concrete block wall with a full-fill insulated cavity. The wall is plastered on both sides. The first floor joists are 225 mm × 50 mm and are fixed to the external wall using joist hangers. The floor is finished with a tongued and grooved hardwood floor, on 20 mm plywood decking with a plasterboard ceiling beneath. To a scale of 1:5, draw a vertical section through the external wall and first floor. On your drawing show the typical construction details from a level 400 mm below the plasterboard ceiling to a level 400 mm above the hardwood floor. Show an internal floor width of 900 mm. Include four typical dimensions. [Visual aid: Sketch of external wall and timber first floor of a dwelling house.]
Marking scheme
Concrete block outer leaf with internal plaster (5 marks) Full fill cavity with wall tie (5 marks) Concrete block inner leaf with render (5 marks) Joist hanger (5 marks) Ceiling joist (5 marks) Airtight tape (5 marks) Plasterboard (5 marks) Plywood decking (5 marks) Tongue & groove flooring (5 marks) Skirting board (5 marks) Any 7 x 5 marks (Sub-total 35 marks) Any 4 typical dimensions (4 marks) Draughting, accuracy and scale (excellent, good, fair) (8, 6, 4 marks) (Sub-total 12 marks)