Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (4)
2024 · Paper 1 · Q3(a) · p.2
Using a single-line labelled sketch, show the pipework required to provide hot and cold water to a mixer-shower and wash basin, and to provide cold water to a toilet cistern. Include the following in your sketch: rising main, insulated cold water storage tank, hot water cylinder, pipework to bathroom fixtures, all necessary valves. [Diagram: A schematic of bathroom plumbing showing hot and cold water supply to fixtures.]
Marking scheme
Pipework required to provide hot and cold water to a mixer-shower and wash basin, and to provide cold water to a toilet cistern. Any 8 x 5 marks. [Diagram: Schematic of hot and cold water pipework for a bathroom, including rising main, storage tank, cylinder, toilet cistern, wash basin, and mixer-shower.] Typical details: 15 mm rising main, Insulated storage tank, 250 l cylinder, Ø22 mm cold feed to cylinder, Ø28 mm expansion pipe, Toilet cistern, Ø15 mm cold feed to toilet cistern, Wash basin, Ø15 mm hot and cold feed to wash basin, Mixer-shower, Ø15 mm hot and cold feed to mixer shower, Valves, Labels. N.B. Any alternative detailing which complies with current Building Regulations is acceptable.
2016 · Paper 1 · Q3(b) · p.2
On the same sketch, show also the pipework necessary to connect the solar collector on the roof to the cylinder. [Diagram: A sketch showing a wood burning stove combined with a solar collector, a dual-coil hot water cylinder, and an expansion tank in the attic.]
Marking scheme
Valid details (4 marks)
2016 · Paper 1 · Q3(a) · p.2
Draw a large freehand sketch of the given diagram and also include the main cold water storage tank in the attic. Show the pipework required to connect the stove to the cylinder. Include the following on your sketch: rising main and the main cold water storage tank, hot water cylinder and expansion pipe, stove and pipework from stove to cylinder, all necessary valves. [Diagram: A sketch showing a wood burning stove combined with a solar collector, a dual-coil hot water cylinder, and an expansion tank in the attic.]
Marking scheme
15 mm rising main (4 marks) Insulated storage tank (4 marks) 22 mm cold feed from storage tank to hot water cylinder (4 marks) Indirect hot water cylinder (4 marks) 22 mm expansion pipe from hot water cylinder (4 marks) Wood burning stove (4 marks) 28 mm primary flow and return from stove and cylinder (4 marks) 22 mm cold supply from expansion tank and 22 mm expansion pipe (4 marks) Insulated expansion tank (4 marks) Overflow from storage and expansion tanks (4 marks) Valves (4 marks) Any 8 of the above details (4 marks each) (Sub-total 32 marks) Quality of sketch (excellent, good, fair) (8, 6, 4 marks)
2014 · Paper 1 · Q3(a) · p.2
Using a single-line labelled diagram, show the pipework necessary to supply hot water to the kitchen sink. Include the following on your diagram: water storage tank and overflow pipe, rising main, stove and back boiler, hot water cylinder and pipework, location of all necessary valves. On your diagram, show the insulation to the water storage tank and to all the pipework. [Diagram: A modern wood burning stove with a back boiler.]
Marking scheme
Secondary circulation Rising main (4 marks) Cold water storage tank and ball valve (4 marks) Overflow (4 marks) Cold feed from storage to indirect hot water cylinder (4 marks) Indirect hot water cylinder (4 marks) Expansion pipe from cylinder (4 marks) Supply to sink (4 marks) Primary circulation Supply to expansion tank (4 marks) Expansion tank and ball valve (4 marks) Overflow (4 marks) Cold water feed and primary return (4 marks) Wood burning stove / back boiler (4 marks) Expansion pipe and primary flow (4 marks) Valves (4 marks) Insulation to water storage tank and pipework (4 marks) Labelling (4 marks) Any 9 of the above details (4 marks each) Sub-total (36 marks) Quality of sketch (excellent, good, fair) (8, 6, 4 marks)