Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2019 · Paper 1 · Q5(b) · p.3
On your drawing show the position of the insulation in the partition. [Diagram: A cross-section of a stud partition within a floor structure.]
Marking scheme
Insulation in stud partition (4 marks) Draughting, accuracy and scale (excellent, good, fair) (8, 6, 4 marks) Sub-total 12 marks Total 50 marks
2019 · Paper 1 · Q5(a) · p.3
To a scale of 1:5 draw a vertical section, parallel to the joists, through the floor and the stud partition. Show the typical construction details from the plasterboard ceiling, through the first floor and the stud partition up to a level 400 mm above the finished floor. Show a floor width of 500 mm on each side of the partition. Include three typical dimensions on your drawing. [Diagram: A cross-section of a stud partition within a floor structure.]
Marking scheme
Upper floor joists 200 mm × 50 mm (5 marks) Insulation between joists 150 mm (5 marks) Plywood 25 mm (5 marks) Ceiling plasterboard, plaster and vapour barrier (5 marks) Stud partition 100 mm × 50 mm (5 marks) Stud soleplate 100 mm × 50 mm (5 marks) Plasterboard 12.5 mm on partition (5 marks) Floor underlay (5 marks) Floating tongued and grooved timber floor (5 marks) Skirting board 120 mm × 20 mm (5 marks) Any 7 of the above details (5 marks each) Sub-total 35 marks Any three typical dimensions (3 marks) Sub-total 38 marks