Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2023 · Paper 1 · Q5(b) · p.3
On your drawing show the typical design detailing to ensure that the cavity is closed at wallplate level. [Visual aid: Sketch showing the eaves of a flat roof.]
Marking scheme
Cavity closer (4 marks) (Sub-total 4 marks)
2023 · Paper 1 · Q5(a) · p.3
The sketch shows the eaves of a flat roof. The roof is covered with a waterproof membrane, on 150 mm rigid insulation, on a 20 mm plywood deck supported by sloping firring pieces. The 200 mm x 50 mm timber joists have a plasterboard ceiling beneath. The roof is supported on a 400 mm concrete block wall with a full-fill insulated cavity. The wall is rendered on both sides. To a scale of 1:5, draw a vertical section through the external wall and the eaves of the flat roof. On your drawing, show the typical construction details from a level 450 mm below the wallplate, through the external wall and eaves. Show 900 mm length of roof joist. [Visual aid: Sketch showing the eaves of a flat roof.]
Marking scheme
Concrete block outer leaf with external render (5 marks) Full fill insulated cavity with wall tie (5 marks) Concrete block inner leaf with internal plaster (5 marks) Wall plate with cavity closer (5 marks) Waterproof membrane (5 marks) Insulation (5 marks) Plywood decking with breather membrane (5 marks) Firring piece (5 marks) Insulated ceiling joist (5 marks) Insulated plasterboard ceiling with airtight membrane (5 marks) Fascia and soffit (5 marks) Gutter (5 marks) Any 8 x 5 marks (Sub-total 40 marks) Draughting, accuracy and scale (excellent, good, fair) (6, 4, 2 marks) (Sub-total 6 marks)