Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2017 · Paper 1 · Q1(a) · 25 marks · p.2
The main door of a house is an insulated wooden door with 12 mm cedar sheeting on both sides, as shown. The door is fitted in a 400 mm concrete block external wall with a full-fill insulated cavity. The wall is rendered on both sides. The doorframe is 150 mm x 70 mm and the door is 90 mm in thickness. [Diagram: A cross-section of a house wall showing a doorframe and door. The wall is 400mm thick concrete block with a cavity. The doorframe is 150mm x 70mm and the door is 90mm thick. The wall is rendered on both sides.] To a scale of 1:5 draw a vertical section through the top of the door, showing the wall, the concrete lintels over the door, the doorframe and the door. Show the typical construction details from 400 mm below the lintels to a level 400 mm above the lintels. Include three typical dimensions on your drawing.
Marking scheme
Any 7 of the following details (5 marks each): 19 mm external render, 100 mm concrete block outer leaf, 200 mm full-fill cavity insulation, Damp proof course (dpc), 100mm concrete block inner leaf, 15 mm internal plaster with skim coat, Reinforced concrete lintels, 18 mm plywood with airtightness seal to wall and doorframe, Insulated plasterboard with skim coat, Proprietary cavity closer, 150 mm x 70 mm door frame, 90 mm door top rail and insulation, 12 mm vertical sheeting to both sides of the door. Sub-total: 35 marks. Three typical dimensions: 3 marks.