Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2025 · Paper 1 · Q1(a) · 25 marks · p.2
To a scale of 1:5, draw a vertical section through the external wall, ground floor, and window. Show the typical construction details from the bottom of the strip foundation to a level 200 mm above the bottom frame of the window. Show a 1.0 metre width of ground floor. [Visual aid: Diagram of a house wall section with window and ground floor]
Marking scheme
Foundation + Solid ground floor (5 x 4 marks) - R.C. strip foundation (4 marks) - Dead blockwork and cavity wall above foundation (4 marks) - Cavity infill (4 marks) - Thermal blocks on inner leaf (4 marks) - DPC (4 marks) - Hardcore/Sand blinding/Radon barrier (4 marks) - Subfloor (4 marks) - Insulation (4 marks) - Screed (4 marks) - Airtightness barrier at floor and wall junction (4 marks) - 20 mm quarry tile finish/Skirting board (4 marks) External wall (4 x 4 marks) - External render (4 marks) - Concrete block outer leaf (4 marks) - Air space / residual cavity (4 marks) - Anchor strap (4 marks) - Breather membrane (4 marks) - Racking board (4 marks) - 250 x 50 mm stud detail and insulation (4 marks) - OSB sheeting (4 marks) - Airtightness membrane (4 marks) - 50 mm insulated service cavity (4 marks) - Plasterboard and skim (4 marks) Window detail (3 x 4 marks) - Cavity closer (4 marks) - Concrete window cill (4 marks) - DPC at cill (4 marks) - Thermally broken window frame (4 marks) - Window board (4 marks) - Triple glazing (4 marks) - Airtight barrier at junction (4 marks) Scale - 4 marks Drafting - 4 marks Excellent - 8 marks Good - 6 marks Fair - 4 marks