Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2017 · Paper 1 · Q1(a) · p.2
To a scale of 1:10, draw a vertical section through the external wall of the kitchen and through both the concrete and timber floors. Show the typical construction details from the bottom of the strip foundation to a level 400 mm above the finished floor and include the abutment of both floors. Show a width of 1.5 metres for each floor. [Diagram: A cross-section of a house wall and floor construction.] Note: It is not necessary to show the kitchen cabinets or the furniture.
Marking scheme
Foundation/concrete ground floor/suspended timber ground floor (12 points x 4 marks) (Drawing 3, Annotation 1) 8 points from foundation and external wall, 4 points from suspended timber floor. foundation and external wall: R.C foundation (4 marks) dead blockwork and cavity wall above floor level (4 marks) wall insulation and thermal block (4 marks) external render and internal render (4 marks) stepped dpc and dpc at floor level (4 marks) lintels and vent for ducting (4 marks) hardcore and sand blinding (4 marks) radon barrier/dpm (4 marks) concrete floor detail (4 marks) perimeter insulation to wall and floor insulation (4 marks) floor tiles and skirting (4 marks) Suspended timber floor: subfloor (under dwarf/tassle walls) (4 marks) radon barrier (4 marks) hardcore and blinding (4 marks) dwarf/tassle/sleeper walls (4 marks) wall plates and dpc (4 marks) floor joists (4 marks) floor insulation (4 marks) floorboards (4 marks) Scale (Excellent 8, Good 6, Fair 4) Drafting (4 marks) (b) Design detailing for cross ventilation (4 marks)