Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2017 · Paper 1 · Q7(a) · p.4
To a scale of 1:10, draw a vertical section through the roof structure. Show the typical construction details from a level 400 mm below the ceiling up to ridge level, and include both external walls. Show the typical design detailing at one of the eaves and include battens, membranes and four courses of slate at eaves. Label the components. [Diagram: Section of a roof structure showing construction details, eaves, and external walls.]
Marking scheme
Vertical section through wall and roof structure (12 x 4 marks) drawing 3 marks, annotation 1 mark Roof Details (any 6 x 4 marks): Ridge level - apex (4 marks) 4 Courses of slates (4 marks) Battens 50 x 30 - 40 mm (4 marks) Breather membrane, tilting fillet (4 marks) Prefabricated roof trusses at 400-600 centres (4 marks) 300-600 mm insulation to ceiling (4 marks) Gypsum plasterboard (4 marks) Facia, soffit, gutter (any 2) (4 marks) Ventilation (4 marks) Wall Details (any 5 x 4 marks): Double headplate 200 x 50 (4 marks) Vertical stud framework 200 x 50 @400 centres (4 marks) Insulated service cavity (4 marks) Vapour barrier to ceiling and wall-joints sealed and taped (4 marks) 12.5 mm gypsum plasterboard and hardwall skim finish (4 marks) Airtight tape at wall and ceiling junction to ensure airtightness (4 marks) Insulation 200 mm (4 marks) Racking board 9-20 mm OSB or plywood (4 marks) Breather membrane with taped joints (4 marks) Vapour diffusion cavity/wall ties/cavity closer (any two) (4 marks) 100mm concrete block outer leaf (4 marks) 15-20 mm 2 coats render (4 marks) Both walls (4 marks) Scale & Drafting (Excellent, good, fair) (8 marks) (b) Three typical roof dimensions (3 x 1 + 1 mark) Typical dimensions (4 marks)