Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2026 · Part A · Q15(c)(ii) · p.17
Suggest one method the system could use to handle these data issues in order to keep the stored dataset reliable.
Marking scheme
Good description – clear understanding demonstrated: 2 marks. Fair description – limited understanding: 1 mark. Suggestions: Data validation check - the system can check if values are within a normal range and reject or flag invalid data like "Error”. Automatic re-reading of sensors - if a reading is missing or invalid, the system can take another reading immediately. Use the last valid reading or average reading - if data is missing, the system can temporarily use the previous correct value or an average of all values. Alert the user - end a warning when sensor errors occur so the problem can be fixed quickly. Any other valid suggestions.
2026 · Part A · Q15(c)(i) · p.17
The data from the embedded system is collected in a table and presented below. [Table: Time (24h), Temperature (°C), Humidity (%), Dehumidifier State, Cooler State, Alarm State. Rows: 09:00 (28.4, 41, OFF, ON, ON), 10:00 (35.1, 39, OFF, ON, ON), 11:00 (-, 38, OFF, ON, ON), 12:00 (27.9, Error, OFF, ON, ON), 13:00 (29.2, 40, OFF, ON, ON)] The temperature reading at 11:00 is missing, and the humidity value at 12:00 is recorded as "Error". Describe two problems that issues like these could cause for the laboratory. 1. 2.
Marking scheme
For each valid answer: Good description – clear understanding demonstrated: 2 marks. Fair description – limited understanding: 1 mark. Points: Incorrect system decisions - if the temperature reading is missing, the system may not turn the fan on or off at the correct time. System acting unnecessarily - the system may assume unsafe conditions and turn devices on or off when it is not needed. Increased energy - fans or dehumidifier systems could run longer than required, wasting electricity. Reduced reliability of the system - frequent errors reduce trust in the monitoring system. Delayed fault detection - real environmental problems might go unnoticed if sensor data is missing or incorrect. Any other valid problem.
2026 · Part A · Q15(b)(ii) · p.16
Identify two input devices and two output devices used by this embedded system. Input device 1: Input device 2: Output device 1: Output device 2:
Marking scheme
Each correct device identified: 1 mark. Inputs: Temperature sensor / thermometer, Humidity sensor. Outputs: Dehumidifier, Cooler, Alarm.
2026 · Part A · Q15(b)(i) · p.16
An embedded system is being set up for a laboratory to make sure conditions are correct for samples being stored. The pseudocode for the system is shown below. 1 LOOP FOREVER 2 READ temperature 3 READ humidity 4 IF temperature < 5 AND humidity > 70 THEN 5 dehumidifier ← ON 6 cooler ← OFF 7 alarm ← ON 8 ELSE IF (temperature >= 5 AND temperature <= 15) AND (humidity >= 40 AND humidity <= 70) THEN 9 dehumidifier ← OFF 10 cooler ← OFF 11 alarm ← OFF 12 ELSE 13 dehumidifier ← OFF 14 cooler ← ON 15 alarm ← ON 16 END IF 17 END LOOP In the table below, use Column B to state the status (on/off) of the dehumidifier, cooler and alarm under the particular conditions in Column A. [Table: Column A Conditions, Column B Status (on/off). Rows: Temperature = 12°C, Humidity = 55%; Temperature = 3°C, Humidity = 80%; Temperature = 18°C, Humidity = 30%. Each row has sub-rows for Dehumidifier, Cooler, Alarm.]
Marking scheme
Each correct ON / OFF state: 1 mark. [Table with Column A (Conditions) and Column B (Status (on/off)). Row Temperature = 12°C, Humidity = 55%: Dehumidifier: OFF, Cooler: OFF, Alarm: OFF. Row Temperature = 3°C, Humidity = 80%: Dehumidifier: ON, Cooler: OFF, Alarm: ON. Row Temperature = 18°C, Humidity = 30%: Dehumidifier: OFF, Cooler: ON, Alarm: ON.]
2026 · Part A · Q15(a)(ii) · p.15
Embedded systems can take in both digital and analogue inputs. For each of the hardware items in Column A state, in Column B, whether each one is a digital input or an analogue input. [Table: Column A Hardware, Column B Digital or Analogue. Rows: Power button on a dishwasher, A microphone receiving sound, A temperature sensor, A security switch to detect if a door is open or closed, An outdoor motion detection light, A street light that turns on based on darkness levels.]
Marking scheme
First three correct answers: 2 marks each. Each subsequent correct answer: 1 mark each (max. 3). [Table with Column A (Hardware) and Column B (Digital or Analogue). Row Power button on a dishwasher: Digital. Row A microphone receiving sound: Analogue. Row A temperature sensor: Analogue. Row A security switch to detect if a door is open or closed: Digital. Row An outdoor motion detection light: Digital. Row A street light that turns on based on darkness levels: Analogue.]
2026 · Part A · Q15(a)(i) · p.15
An embedded system is a computer system built into another device to perform specific functions. Examples include washing machines, robot vacuums, self-service checkouts, and fitness trackers. Embedded systems are different to the general-purpose laptops and mobile devices that we use on a daily basis. State three advantages of embedded systems over general-purpose computers. 1. 2. 3. [Image: A washing machine, a robot vacuum cleaner, and a self-service checkout terminal.]
Marking scheme
First correct response: 4 marks. Second correct response: 4 marks. Third correct response: 2 marks. Points: Embedded systems do one specific task, while general-purpose computers can do many tasks. Embedded systems run one fixed program, but general-purpose computers let users install lots of software. Embedded systems use limited hardware (small memory, low power), while general-purpose computers have powerful processors and lots of RAM. Embedded systems often have little or no user interface, while general-purpose computers have full interfaces like keyboards, touchscreens, and operating systems. Embedded systems are built into another device (e.g., microwave, car), but general-purpose computers work as standalone machines. Embedded systems must respond in real time, while general-purpose computers do not always need strict timing. Embedded systems are usually cheaper and smaller, while general-purpose computers are larger and more expensive. Any other valid advantage.
2025 · Part A · Q13(b)(iii) · p.12
The enhancement of computers over the last few decades has allowed for the development of specific-purpose computers such as embedded systems. Describe two examples of embedded systems in our everyday lives. 1. 2.
Marking scheme
For each: Good description – clear understanding demonstrated 2 marks Fair description / name only – limited understanding 1 mark
2024 · Part A · Q11 · p.8
Provide one example of a digital input and one example of an analogue input on an embedded system you have used, such as those shown in Figure 2. Digital input: Analogue input: Figure 2
Marking scheme
Digital Inputs: Button. On/Off Switch. Shake. Pins. Accept any relevant digital input. Analogue Inputs: Accelerometer. Magnetometer. Temperature Sensor. Light Sensor. Moisture Sensor. Sound Sensor. Pressure Sensor. Distance Sensor. Moisture Sensor. Accept any relevant analogue input. For each (digital/analogue): Good example 3 marks. Fair example 2 marks.
2023 · Part A · Q2(b) · p.3
Name one example of an embedded system you might find in your home.
Marking scheme
Examples of Embedded Systems can be any digital device created for specific tasks – these include domestic appliances such as washing machines, dish washers, etc. Do not accept Micro:bit, Raspberry Pi as valid examples Valid example 2 marks
2023 · Part A · Q2(a) · p.3
Describe the main difference between a general-purpose computer and an embedded system.
Marking scheme
General-purpose computers can have many uses, embedded systems have a limited or specific number of uses General-purpose computers can be easily reprogrammed, embedded systems can't easily be upgraded General-purpose computers are generally higher cost, embedded systems are relatively low cost Good description – clear understanding demonstrated 4 marks Fair description – limited understanding 2 mark
2022 · Part A · Q3(b) · p.4
Describe the appearance of the LEDs at the end of the algorithm. [Pseudocode: Start, Set all pins to off, Set pin 0 to on, Pause for 2 seconds, Set pin 0 to off, Set pin 1 to on, Pause for 2 seconds, Set pin 1 to off, Set pin 2 to on.] [Diagram: Microbit board with pins 0, 1, 2 labelled. A green LED is connected to pin 0, a yellow LED to pin 1, and a red LED to pin 2.]
2022 · Part A · Q3(a) · p.4
Why are pauses included in this algorithm? [Pseudocode: Start, Set all pins to off, Set pin 0 to on, Pause for 2 seconds, Set pin 0 to off, Set pin 1 to on, Pause for 2 seconds, Set pin 1 to off, Set pin 2 to on.] [Visual aid: pseudocode listing steps]