Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2015 · Paper 1 · Q2(f) · 6 marks · p.3
Name the piece of equipment used to measure out (i) 25.0 cm³ of the sodium carbonate solution, (ii) 22.7 cm³ of the hydrochloric acid solution required for neutralisation.
2015 · Paper 1 · Q2(d) · 3 marks · p.3
Explain why flask F must be inverted several times after filling to line L and stoppering.
2015 · Paper 1 · Q2(c) · 6 marks · p.3
Sketch flask F in your answer book and show clearly the surface of the solution near line L when the flask is filled to exactly 500 cm³. [Diagram: A volumetric flask labelled F, with a capacity of 500 cm³ and a line marked L indicating the fill level.]
2015 · Paper 1 · Q2(b) · 3 marks · p.3
State one precaution taken to ensure that all of the sodium carbonate in the beaker ended up in F.
2015 · Paper 1 · Q3(a) · 5 marks · p.3
What colour flame would indicate the presence of potassium?
2015 · Paper 1 · Q4(j) · p.4
Name the separation technique in which a mobile phase carrying a mixture is caused to move in contact with a selectively adsorbent stationary phase. The mixture may contain coloured or colourless components.
2014 · Paper 1 · Q1(c) · 6 marks · p.2
Why should the first few test-tubes of gas collected be discarded?
2014 · Paper 1 · Q1(b) · 9 marks · p.2
Identify (i) the liquid A, (ii) the solid B, (iii) the liquid C. [Diagram: Apparatus for preparing ethyne gas. A is a flask containing a liquid, B is a solid in the flask, C is a test tube collecting gas over water.]
2014 · Paper 1 · Q10(a)(iii) · 7 marks · p.6
Copy the table into your answer book and complete it with the expected results of the tests. [Table: Solid, Flame Test Result, Chloride Test Result, Observation. Row: LiCl, blank, blank, blank.]
2014 · Paper 1 · Q10(a)(ii) · 6 marks · p.6
What reagent is used to test for the chloride ion?
2014 · Paper 1 · Q10(a) · 12 marks · p.6
You are asked to test a white crystalline solid to confirm that it is lithium chloride (LiCl). Describe how to carry out a flame test on the solid.
2014 · Paper 1 · Q11(a) · 25 marks · p.7
Consider the following six terms. refluxing fractionation distillation chromatography recrystallisation steam distillation In your answer book, match any five of the terms above with their corresponding descriptions (A to F) in the table below. [Table: Terms and Descriptions. A: Separation of coloured components using solvent and solid phase. B: Separation of two liquids by boiling points. C: Dissolving impure crystals in hot solvent, filtering, cooling. D: Separation of crude oil components by boiling points. E: Boiling reaction mixture without loss. F: Extraction of clove oil.]