Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2026 · Paper 1 · Q6(c)(ii) · p.7
Use the information above to calculate the heat of formation (ΔH) of hydrogen sulfide (H2S).
2026 · Paper 1 · Q6(c)(i) · p.7
Explain what is meant by the term heat of formation.
2021 · Paper 1 · Q6(d) · 15 marks · p.8
The heat of combustion of ethanethiol, a mercaptan, according to the following balanced equation, is -1867.5 kJ mol⁻¹. C2H5SH (l) + 4O2 (g) → 2CO2 (g) + 3H2O (l) + SO2 (g) Use this heat of reaction and the heats of formation of carbon dioxide, water and sulfur dioxide, -393.5, –285.8 and -296.8 kJ mol⁻¹, respectively, to calculate the heat of formation of ethanethiol.
Marking scheme
USE: -73.7 kJ mol⁻¹ (15) ΔHcombustion = ΣΔHformation products - ΣΔHformation reactants ΔHcombustion = (−787.0) kJ mol⁻¹ (3) + (-857.4) mol⁻¹ (3) + (−296.8) kJ mol⁻¹ (3) – ΔHformation (ΔHcombustion = (−1941.2) kJ mol⁻¹ (9) – ΔHformation) ΔHformation = (-787.0) kJ mol⁻¹ + (−857.4) k mol⁻¹ + (−296.8) kJ mol⁻¹ + 1867.5 (3) kJ mol⁻¹ ΔHformation = -1941.2 + 1867.5 = −73.7 (3) kJ mol⁻¹ or 2CO₂ + 3H₂O + SO₂ → C₂H₅SH + 4½O₂ ΔH = 1867.5 kJ (3) 2C + 2O₂ → 2CO₂ ΔH = -787.0 kJ (3) 3H₂ + ½O₂ → 3H₂O ΔH = -857.4 kJ (3) < -1941.2 (9) S + O₂ → SO₂ / S₈ + ½O₂ → SO₂ ΔH = -296.8 kJ (3) 2C + 3H₂ + S → C₂H₅SH ΔHformation = -73.7 kJ mol⁻¹/ 1 2C + 3H₂ + S₈ → C₂H₅SH ΔHformation = -73.7 kJ mol⁻¹ (3) Mixing and matching from different boxes not acceptable. Equations not essential in second box, however: Final Answer ΔH = +73.7 kJ mol⁻¹ and C₂H₅SH → 2C + 3H₂ + S / C₂H₅SH → 2C + 3H₂ + 1/8 S₈ worth 12 marks only when clearly associated with this equation. Scheme above applies. (3)
2020 · Paper 1 · Q6(d)(ii) · 21 marks · p.7
The heats of formation of propane, carbon dioxide and water are -104.7, -393.5 and -285.8 kJ mol⁻¹ respectively. Write a balanced equation for the combustion of propane in a plentiful oxygen supply and use the data provided to calculate the heat of combustion of propane.
2020 · Paper 1 · Q6(d)(i) · p.7
Define heat of formation.
Marking scheme
EXPLAIN: knocking: results from petrol autoigniting (pre-igniting, igniting too early, igniting before spark) / pinking (pinging, tapping) / etc (4) octane number: measure of tendency (ability) of a fuel to resist knocking (autoigniting, pre-igniting, igniting too early, igniting before spark, knock)* / fuel performance rating based on its equivalence to a certain mixture of heptane and 2,2,4-trimethylpentane (4) [*Opposite acceptable]
2019 · Paper 1 · Q6(c) · 23 marks · p.7
Tetraethyllead is a petrol additive, now used only in some aeroplane engines. (i) What is the advantage of adding tetraethyllead to petrol? (ii) Why was its use in car engines discontinued? (iii) Tetraethyllead burns completely according to the equation: 2(C2H5)4Pb (1) + 2702 (g) → 16CO2 (g) + 20H2O (l) + 2PbO (s) The heats of formation of tetraethyllead, carbon dioxide, water and lead(II) oxide are 52.7, -393.5, –285.8 and −219.0 kJ mol¯¹ respectively. Calculate the heat of reaction for the combustion of one mole of tetraethyllead.
2018 · Paper 1 · Q3(b) · 9 marks · p.4
(i) Why should the mixture be stirred before taking temperature readings? (ii) Suggest a reason why the temperature, having risen, then began to fall gradually. (iii) The thermometer used was accurate to 0.1 K. What temperature rise would have been recorded if the thermometer used was accurate to 1 K?
Marking scheme
(i) distribute heat evenly / avoid taking temperature of a hot (cold) spot (place) / get a more accurate result / ensure complete (fast) reaction [Allow (3) for 'uniform (homogeneous) solution'.] (3) (ii) heat loss to the surroundings / cardboard is not a good insulator / the solution is hotter than the room (surroundings) (3) (iii) 6 K (3) (iv) bigger temperature rise recorded / more accurate result / less percentage error / temperature rise easier to measure accurately. [Allow (3) for 'because reaction faster'.] [Reference to heat instead of temperature not acceptable.] (6)
2018 · Paper 1 · Q3(a) · 5 marks · p.4
Is this reaction exothermic or endothermic? Justify your answer.
Marking scheme
exothermic (3) temperature goes up / heat given out (2) [Justify marks only for 'exothermic' awarded.]
2018 · Paper 1 · Q6(b) · p.7
(i) Name the two major components of liquid petroleum gas (LPG), a fuel obtained from refinery gas. (ii) Why is methanethiol (CH3SH), a mercaptan, added to natural gas and to LPG? (iii) Calculate the heat of combustion of methanethiol according to the equation: CH3SH (g) + 3O2 (g) → CO2 (g) + 2H2O (l) + SO2 (g) The heats of formation of methanethiol, carbon dioxide, water, and sulfur dioxide are -22.8, -393.5, -285.8 and -296.8 kJ mol⁻¹ respectively.
Marking scheme
(i) NAME: propane // butane / methylpropane (2-methylpropane) (2 x 3) (ii) WHY: to give a smell / to help detect leaks / safety (3) (iii) CALCULATE: -1239.1 kJ mol⁻¹ (12) ΔHcombustion = ΣΔHƒ(products) – ΣΔHƒ(reactants) = -571.6 kJ (3) + [(-393.5) + (−296.8)] kJ (3) – (−22.8 kJ) (3) OR = -571.6 kJ (3) [−393.5−296.8] kJ (3) + 22.8 kJ (3) OR = -1261.9 kJ (6) + 22.8 kJ (3) and = -1239.1 kJ mol⁻¹ (3) [+1239.1 by this method is not a slip and is worth maximum (9).] [+1239.1 with no work shown is worth (3).] OR 2H₂ + O₂ → 2H₂O ΔH = -571.6 kJ (3) C + O₂ → CO₂ ΔH = -393.5 kJ (3) S + O₂ → SO₂ ΔH = -296.8 kJ CH₃SH → C + 2H₂ + S ΔH = 22.8 kJ (3) CH₃SH + 3O₂ → CO₂ + 2H₂O + SO₂ ΔH = -1239.1 kJ mol⁻¹ (3) Equations not essential, however: Final Answer: CO₂ + 2H₂O + SO₂ → CH₃SH + 3O₂ ΔH = +1239.1 kJ is worth (9) marks with this equation Final Answer: +1239.1 kJ is worth (3) marks if accompanied by no equation or by an equation other than that for combustion in reverse: (CO₂ + 2H₂O + SO₂ → CH₃SH + 3O₂).
2017 · Paper 1 · Q6(e) · 15 marks · p.7
State Hess's law. The heats of formation of dodecane, but-2-ene, 2-methylbutane and X are -350.9, -9.3, –178.4 and 20.0 kJ mol¯¹ respectively. Use the data to calculate the heat change for the cracking reaction: C12H26 (l) → but-2-ene (g) + 2-methylbutane (l) + X (g)
Marking scheme
heat change for a reaction // depends only on initial and final states / is same whether reaction takes place in one or more stages / is independent of path taken / is sum of heat changes for all stages [Final Answer C4H8 + C5H12 + C3H6 → C12H26 ΔΗ = -183.2 kJ is worth (6) marks.] [Equations not essential, however final answer -183.2 kJ is worth only (3) marks if not accompanied by an equation or if accompanied by an equation other than that for cracking in reverse.]
2015 · Paper 1 · Q6(e) · 12 marks · p.7
Ethanol can also be used as a fuel. Calculate the heat of formation of ethanol given that the heat of combustion of ethanol is -1370.7 kJ mol⁻¹ and that the heats of formation of carbon dioxide and water are -393.5 and –285.8 kJ mol⁻¹ respectively.
2014 · Paper 1 · Q6(d) · 24 marks · p.5
Define heat of combustion. Write the balanced equation for the complete combustion of butane in an adequate supply of oxygen. Calculate the heat of combustion of butane, given that the heats of formation of carbon dioxide, water and butane are -393.5, –285.8 and –125.7 kJ mol⁻¹, respectively.