Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2019 · Paper 1 · Q7(b) · p.5
Two equal uniform rods GF and FE, each of length 2l and weight W, are smoothly jointed at F. The rods are in equilibrium with the end G resting on a rough horizontal surface. The end E is held above the surface. The rod FE is horizontal, and the rod GF is inclined at an angle of 60° to the horizontal. G is on the point of slipping. Find (i) the coefficient of friction (ii) in terms of W, the horizontal and vertical forces at E. [Diagram: Two rods GF and FE of equal length 2l and weight W, joined at F. FE is horizontal. GF is inclined at 60° to the horizontal. G rests on a rough horizontal surface. E is above the surface. The system is in equilibrium.]
2018 · Paper 1 · Q7(b) · p.5
Two equal uniform rods, AB and BC, smoothly jointed at B, are in equilibrium with the end C resting on a rough horizontal plane and the end A freely pivoted at a point above the plane. 30° and 45° are the inclinations of AB and BC to the horizontal as shown in the diagram. The coefficient of friction between BC and the plane is μ. [Diagram: Two rods AB and BC joined at B. A is pivoted above. C rests on a horizontal plane. AB is inclined at 30 degrees to the horizontal. BC is inclined at 45 degrees to the horizontal.] Show that μ ≥ (9-√3)/13.
2018 · Paper 1 · Q7(a) · p.5
One end of a uniform ladder, of weight W and length l, rests against a rough vertical wall, and the other end rests on a rough horizontal floor. The coefficient of friction between the ladder and the wall is √3/2 and the coefficient of friction between the ladder and the floor is 5√3/2. The ladder makes an angle θ with the floor and is in a vertical plane which is perpendicular to the wall. The ladder is on the point of slipping. Find the value of θ. [Diagram: A ladder leaning against a vertical wall and resting on a horizontal floor. The angle between the ladder and the floor is θ.]
2018 · Paper 1 · Q9(b) · p.6
A thin uniform rod AB of length 2h and weight W, can turn freely about the end A, which is fixed at a height h above the surface of water into which the other end dips. The rod is in equilibrium when inclined at 45° to the vertical. [Diagram: A rod AB pivoted at A. End B dips into water. The rod is inclined at 45 degrees to the vertical.] Find the relative density of the rod.
2017 · Paper 1 · Q7(b) · p.5
Two equal uniform rods, AB and BC, of length 2a and weight W, are freely jointed at B. They rest in equilibrium on two smooth pegs at the same horizontal level which are 2d apart. Each rod is inclined at θ° to the vertical. B is below A and C. [Diagram: Two rods AB and BC of equal length, joined at B. They rest on two pegs at the same horizontal level, 2d apart. Each rod is inclined at θ to the vertical. B is below A and C. The horizontal distance between the pegs is labelled 2d. The angle θ is shown between each rod and the vertical.] Prove d = a sin³ θ.
2017 · Paper 1 · Q7(a) · p.5
Three equal uniform rods, QP, QR, RP, each 30 cm long and of weight 6 N, are freely jointed at P, Q and R to form a triangle. The triangle is placed over a smooth peg at the midpoint of QR, so that P is below QR. [Diagram: An equilateral triangle PQR formed by three rods. A peg is placed at the midpoint of QR, supporting the triangle. P is below QR.] Find the reaction at Q and the reaction at P.
2016 · Paper 1 · Q7(b) · p.5
Two uniform rods, XZ and YZ, of length 2 m and weight W, are freely jointed at Z, and rest in equilibrium in a vertical plane with the ends X and Y on a smooth horizontal plane. Each rod is inclined at an angle θ to the horizontal. A string connects the mid points of the rods. (i) Show that the tension in the string is W / tan θ A weight 2W is placed 25 cm from X on XZ. (ii) Show that the tension of the string is increased by 25%. [Visual aid: Diagram: Two uniform rods XZ and YZ of length 2m and weight W, joined at Z. X and Y are on a horizontal plane. Each rod is inclined at angle theta. A string connects the midpoints of the rods.]
2016 · Paper 1 · Q7(a) · p.5
A uniform beam AB of length 30 m and mass 200 kg is held in limiting equilibrium by a light inextensible cable attached to B as shown in the diagram. End A of the beam rests on a smooth horizontal surface. The angle between the beam and the surface is 25º and the cable makes an angle of 65° with the horizontal. Find (i) the tension in the cable (ii) the magnitude of the reaction at A.
2015 · Paper 1 · Q7(b) · p.5
Two uniform rods, XZ and YZ, of equal length, are freely jointed at Z, and rest in equilibrium in a vertical plane with the ends X and Y on a rough horizontal plane. The weight of XZ is 2W and the weight of YZ is W. [Diagram: Two rods XZ and YZ of equal length, jointed at Z. X and Y are on a horizontal plane. The angle XZY is θ. The weight of XZ is 2W, acting at its midpoint. The weight of YZ is W, acting at its midpoint.] (i) Find the normal reaction at X and the normal reaction at Y. (ii) Show that as θ increases, slipping occurs at Y before X. (iii) Find the coefficient of friction if YZ is on the point of slipping when θ = 90°.
2015 · Paper 1 · Q7(a) · p.5
A uniform beam AB of length 3l and weight W is free to turn in a vertical plane about a hinge at A. The beam is supported in a horizontal position by a string attached to the beam at D and to a point E which is at a height c vertically above A. [Diagram: A horizontal beam AB hinged at A. A string connects point D on the beam to point E, which is vertically above A. The length AD is l. The length AE is c.] If |AD| = l, find in terms of W, l and c (i) the tension in the string (ii) the magnitude of the reaction at the hinge.
2014 · Paper 1 · Q7(b) · p.5
A uniform rod of length 3.4 m and weight 85 N is smoothly hinged at P to a rough horizontal floor. The rod rests on the smooth curved surface of a hemisphere whose plane face is on the floor. The rod is in equilibrium and inclined at 45° to the horizontal. The hemisphere, of weight 44 N and radius 1 m, is in limiting equilibrium. [Diagram: A rod hinged at P, resting on a hemisphere. The rod is inclined at 45° to the horizontal. The hemisphere's flat base is on the floor.] (i) Show on separate diagrams the forces acting on the rod and on the hemisphere. (ii) Find the coefficient of friction between the hemisphere and the floor. (iii) Find the magnitude and direction of the reaction at P.
2014 · Paper 1 · Q7(a) · p.5
A letter L is made from a sheet of uniform thin plastic, with dimensions as shown in the diagram. [Diagram: A letter L shape. The vertical part is 40 cm high and 12 cm wide. The horizontal part extends 36 cm from the bottom of the vertical part and is 12 cm wide. Points A, B, C, D are labelled.] (i) Find the distance of its centre of mass from each of the lines AB and AD. This letter L is to be used for a shop sign. It is held in position by nails at D and C. The nail at C breaks so that the letter is freely suspended from D. (ii) What angle will the line AD make with the vertical when the letter is hanging in equilibrium?