Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2021 · Paper 1 · Q4(a) · p.3
The diagram shows a light inextensible string having one end fixed, passing under a smooth movable pulley C of mass km kg and then over a fixed smooth pulley. The other end of the string is attached to a light scale pan. A bock D of mass m kg is placed symmetrically on the centre of the scale pan. The system is released from rest. The scale pan moves upwards. [Diagram: A fixed pulley at the top. A string goes down, under a movable pulley C, then up to a fixed point. Another string connects the scale pan to the movable pulley C. A block D is on the scale pan.] (i) Show that k > 2. (ii) Find, in terms of k and m, the tension in the string. (iii) Find, in terms of k and m, the reaction between D and the scale pan.
Marking scheme
kmg - 2T = kma T - mg = ma a = (k-2)g / (k+4) a > 0 => k > 2 (5) (5)
2020 · Paper 1 · Q4(b) · p.3
A particle C of mass 2m rests on a rough plane which is inclined at 30° to the horizontal. The coefficient of friction between C and the plane is √3 / 3. A light inextensible string which passes under a smooth movable pulley of mass 3m connects C to a particle D of mass m, as shown in the diagram. [Diagram: A rough inclined plane at 30 degrees to the horizontal. A particle C (mass 2m) is on the plane. A movable pulley (mass 3m) is below C. A string goes under the pulley and connects C to D (mass m). D is hanging vertically. The angle of inclination is 30 degrees.] The system is released from rest. C moves up the plane. (i) Show, on separate diagrams, the forces acting on the moveable pulley and on each of the masses. (ii) Find in terms of m the tension in the string.
2020 · Paper 1 · Q4(a) · p.3
A block A of mass 10m on a smooth plane inclined at an angle α with the horizontal, where tan α = 3/4, is connected by a light inextensible string which passes over a smooth pulley to a second block B of mass 10m. B is 24.5 cm above an inelastic horizontal floor, as shown in the diagram. [Diagram: A block A on an inclined plane. The plane is inclined at angle alpha to the horizontal. A string connects A over a pulley to block B. Block B is above a horizontal floor. The distance from B to the floor is 24.5 cm. The angle alpha is shown. The mass of A is 10m, the mass of B is 10m.] The system is released from rest. Find (i) the acceleration of B (ii) the time that B remains in contact with the floor.
2019 · Paper 1 · Q4(a) · p.3
Two particles of masses 0.4 kg and 0.3 kg are attached to the ends of a light inextensible string which passes over a light smooth fixed pulley. They are held at the same level, as shown in the diagram. The system is released from rest. Find (i) the tension in the string (ii) the speed of the 0.4 kg mass when it has descended 0.7 m. [Diagram: A light smooth pulley at the top. A string passes over the pulley with masses 0.4 kg and 0.3 kg attached to its ends. The masses are shown at the same level, initially at rest.]
2018 · Paper 1 · Q4(b) · p.3
A moveable pulley of mass m is suspended on a light inextensible string between two fixed pulleys as shown in the diagram. Masses of 6 kg and 3 kg are attached to the ends of the string. The system is released from rest. [Diagram: A system of pulleys. A moveable pulley of mass m is suspended by a string. The string passes over two fixed pulleys, with masses 6kg and 3kg attached to its ends.] (i) Show, on separate diagrams, the forces acting on the moveable pulley and on each of the masses. (ii) Find in terms of m the tension in the string. (iii) For what value of m will the acceleration of the moveable pulley be zero?
2018 · Paper 1 · Q4(a) · p.3
A block A of mass m is connected by a light inextensible string to a second block B of mass 3 kg. They slide down a rough inclined plane which makes an angle α with the horizontal where tan α = 4/3. The string remains taut in the subsequent motion. The coefficient of friction between A and the plane is 3/4. The coefficient of friction between B and the plane is 1/3. The system is released from rest. [Diagram: A block A of mass m and a block B of mass 3kg are connected by a string, sliding down an inclined plane at angle alpha. Block B is below A on the slope.] Find (i) the acceleration of B, in terms of m (ii) the value of m if the tension in the string is 3.92 N.
2017 · Paper 1 · Q4(a) · p.3
Two scale pans A and B, each of mass m kg, are attached to the ends of a light inextensible string which passes over a light smooth fixed pulley. They are held at the same level, as shown in the diagram. A mass of 3m kg is now placed on A. The system is released from rest. [Diagram: A light smooth pulley with a string passing over it. Two scale pans, A and B, are attached to the ends of the string, hanging at the same level. A mass of 3m is placed on pan A.] Find (i) the tension in the string in terms of m (ii) how far B has risen when it reaches a speed of 0.4 m s⁻¹ (iii) the reaction on the 3m kg mass in terms of m.
2016 · Paper 1 · Q4(b) · p.3
A light inextensible string passes over a small smooth fixed pulley, under a small smooth moveable pulley, of mass 14 kg, and then over a second small smooth fixed pulley. A 5 kg mass is attached to one end of the string and a 7 kg mass is attached to the other end. The system is released from rest. (i) Find the tension in the string. (ii) If instead of the system starting from rest, the moveable pulley is given an initial upward velocity of 0.8 m s¯¹, find the time taken until the moveable pulley reverses direction. [Visual aid: Diagram: A system of pulleys and masses. A string passes over two fixed pulleys and under a movable pulley. A 5kg mass is attached to one end, a 7kg mass to the other. The movable pulley has mass 14kg.]
2016 · Paper 1 · Q4(a) · p.3
The block P has a light pulley fixed to it. The two blocks P and Q, of mass 40 kg and 30 kg respectively, are connected by a taut light inextensible string passing over a light smooth fixed pulley, A, as shown in the diagram. P is on a rough plane which is inclined at 30° to the horizontal. The coefficient of friction between P and the inclined plane is 1/4 Q is hanging freely. The system is released from rest. Find (i) the acceleration of P and the acceleration of Q (ii) the speed of P when it has moved 30 cm.
2015 · Paper 1 · Q4(b) · p.4
A wedge of mass 11 kg is held on the ground with its base horizontal and smooth faces inclined at 30° and 45° respectively to the horizontal. A 5 kg mass on the face inclined at 30° is connected to a 7 kg mass on the other face by a light inextensible string which passes over a smooth light pulley. The system is released from rest and the wedge does not move. [Diagram: A wedge on the ground with two inclined faces. A 5kg mass is on the 30° face, and a 7kg mass is on the 45° face. They are connected by a string over a pulley at the top of the wedge.] Find (i) the acceleration of the particles (ii) the vertical force exerted on the ground.
2015 · Paper 1 · Q4(a) · p.3
Two particles P and Q, of mass 4 kg and 7 kg respectively, are lying 0.5 m apart on a smooth horizontal table. They are connected by a string 3.5 m long. Q is 6 m from the edge of the table and is connected to a particle R, which is of mass 3 kg and is hanging freely, by a taut light inextensible string passing over a light smooth pulley. The system is released from rest. Find (i) the initial acceleration of Q and R (ii) the speed of Q when it has moved 3 m (iii) the speed with which P begins to move. [Diagram: A horizontal table with particles P and Q on it, connected by a string. Particle Q is near the edge of the table and is connected by another string to a hanging particle R, passing over a pulley at the edge of the table.]
2014 · Paper 1 · Q4(a) · p.3
A block A of mass 4 kg, can slide on a rough horizontal table. It is connected inelastically to a pulley system from which B, a mass of 8 kg, hangs freely under gravity by a light inelastic string, as shown in the diagram. [Diagram: A block A on a horizontal surface connected by a string over a pulley to a hanging mass B. A horizontal force P is applied to A.] A horizontal force P of 320 N is applied to the mass A, which then moves in the direction of P. The coefficient of friction between A and the table is 4/7. Find (i) the acceleration of A (ii) the tension in the string connected to B.