Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (2)
2019 · Paper 1 · Q3(c) · 12 marks · p.11
The back panel of the cereal dispenser is made from a manufactured board covered with a sheet of plastic. [Image: A piece of manufactured board and a sheet of plastic, labelled 'Manufactured Board' and 'Plastic sheet' respectively.] (i) Name a suitable manufactured board. Name: (ii) Describe a method, other than gluing, of joining the plastic sheet to the manufactured board. Answer: (iii) In the space opposite make a 3D sketch of a suitable handle for the lid of the cereal dispenser. [Blank space provided for sketch.]
2014 · Paper 1 · Q1(a) · 12 marks · p.6
An image of a ring-throwing game is shown. (i) Brass was selected as the material for the rod. Give a reason for this choice. Reason: (ii) Name a suitable wood for the base and give a reason for your choice. Wood: Reason: (iii) A ring is required that will not damage the wood or the brass. Name a suitable material for the ring and state a property of this material. Material: Property: [Image: A ring throwing game with a horseshoe shaped ring, a brass rod, and a base. The rod is threaded at the bottom.]