Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (3)
2019 · Paper 1 · Q3(b) · 6 marks · p.10
The rotor used to dispense the cereal is shown opposite. It was decided to 3D print the rotor. [Image: A 3D printed rotor with multiple fins, designed to fit inside the cereal dispenser.] (i) Suggest one reason why 3D printing is a good choice for manufacturing this part. Answer: (ii) Suggest one advantage of 3D printing from an environmental point of view. Answer:
2016 · Paper 1 · Q2(e) · 4 marks · p.9
The image shows the container for the bubble solution. It was found that vacuum forming was not a suitable method of producing this container. Suggest a reason for this. Reason: [Image: A rectangular container for bubble solution.]
Marking scheme
The image shows the container for the bubble solution. It was found that vacuum forming was not a suitable method of producing this container. Suggest a reason for this. Reason: The sides of the container are vertical and as such will not release from the mould when vacuum formed. 4mks
2014 · Paper 1 · Q3(b) · 8 marks · p.10
(i) Half of the outline of the tinted display panel is shown. Complete the drawing of the display panel in the space provided. (ii) Two red LEDs light up the display panel. Explain the term LED. LED: (iii) List two steps required to produce a smooth finish on the edges of the display panel. Step 1: Step 2: [Diagram: Half of the outline of a display panel with dimensions R20, R10, and R35 indicated for curved corners.]