Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (7)
2019 · Paper 1 · Q1(d) · 12 marks · p.7
A switch and five LEDs must be connected to the Printed Circuit Board shown below. Sketch in the wire connections from each component to the PCB so that the switch activates all five LEDs. [Image: A simple Printed Circuit Board (PCB) labelled 'GAME PCB' with several components mounted on it, including resistors. A single-pole, double-throw (SPDT) switch labelled '2A 250 VAC' is shown, along with five LEDs with wires. An arrow indicates a 'Positive' connection point.]
Marking scheme
[Wiring diagram: A switch connected to a Printed Circuit Board (PCB) with five LEDs connected to the PCB. The switch should be wired such that activating it causes all five LEDs to light up. Each LED should have its positive and negative connections correctly wired to the PCB. The diagram should clearly show the path of the current from the switch, through the PCB, to each LED.]
2015 · Paper 1 · Q15 · p.4
Dynamo torches do not use: [Image: A dynamo-powered torch.] Disposable Batteries Electricity Energy
2015 · Paper 1 · Q16 · p.5
LED stands for: [Image: Five LEDs of different colours.] Light Energised Diode Light Emitting Diode Light Energy Diffusion
2015 · Paper 1 · Q18 · p.5
The resistance of an LDR varies with: [Image: A Light Dependent Resistor (LDR).] Temperature Humidity Light intensity
2015 · Paper 1 · Q19 · p.5
The total resistance in this circuit is: [Circuit Diagram: Two resistors, 100Ω and 200Ω, connected in series with a positive and negative terminal.] 200 Ohms 20000 Ohms 300 Ohms
2015 · Paper 1 · Q2(d) · 8 marks · p.9
The components for the operation of the Steady Hand Game are shown. Draw in the connections between the components to complete the circuit for the game. (The LED has been omitted.) [Diagram: Various electronic components including a switch, battery holder, buzzer, and wires.]
Marking scheme
The components for the operation of the Steady Hand Game are shown. Draw in the connections between the components to complete the circuit for the game. (The LED has been omitted.) [Diagram showing the components of the Steady Hand Game (switch, battery holder, wires, buzzer) and the connections between them to form a complete circuit. Each connection equals 2mks. Variety of possible solutions. Polarity should be ignored.]
2015 · Paper 1 · Q2 · p.2
The symbol shown represents a: [Image: A USB symbol.] USB connection VGA connection HDMI connection
Marking scheme
(i) Name a suitable material for the base and for the dinosaur figure. Give a reason for your choice of each material. Base Material: High Impact Polystyrene. [2 marks] Reason: It can be vacuum formed easily into the shape of the base. [2 marks] Dinosaur Material: Any metal wire. [2 marks] Reason: It is a good conductor of electricity. [2 marks] (ii) A detail view of the method used to connect the dinosaur to the base unit is shown. Suggest one advantage of this method of attachment and explain why brass is a good choice of material for the socket. Advantage: The dinosaur can be easily fitted or removed. Different shapes can be fitted. [2 marks] Brass is a good choice of material because: It is a good conductor and is attractive in appearance. [2 marks] (b) In the space below sketch an alternative shape to use in the 'Steady Hand Game' instead of the dinosaur. [Sketch of an alternative shape for the Steady Hand Game. The marking scheme indicates a scale for quality of sketch: No Attempt 0, Fair 1, Good 2, Excellent 3 marks. It also indicates marks for Idea: 0 to 2 marks.]