Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2016 · Part B · Q4(a) · 30 marks · p.7
The robot shown can be assembled from a kit containing a programmable microcontroller, suitable sensors, two geared motors with drive wheels, a free turning wheel, a battery and a frame. [Image: A small, wheeled robot constructed from a kit, showing motors, wheels, and a central programmable unit.] (i) Outline the purpose of the microcontroller. (ii) Outline how the microcontroller is programmed. (iii) Briefly outline how the robot can perform each of the following actions: • move forward and turn right • avoid an obstruction. (iv) Sketch a design change necessary to allow the robot to travel over soft ground.
Marking scheme
(i) • [ 6 marks ] process input / output, motor control, etc. (ii) • [ 6 marks ] Code written (flowchart created) with application (on PC) & transferred / downloaded to microcontroller. (iii) • Forward (3 marks) - 2 motors operate together, Turn right (3 marks ) - right motor stop & left motor forward. • Stop, reverse, turn right, forward, turn left, forward. (Sensors detect obstruction, sub-routine activated to run sequence of movements to avoid obstruction. ) (iv) • [ 6 marks] Sketch valid solution (tracks / wider wheels) [Sketch of robot with tracks or wider wheels].