Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (12)
2017 · Part A · Q20 · p.5
Name the gear shown at X and state one advantage of using this gear in this situation. [Diagram: A gear mechanism with a worm gear labelled X.] X: Advantage:
Marking scheme
X: 2 marks Worm Gear Advantage: 2 marks Large speed reduction, Locks drive shaft, Drive shaft cannot run in reverse, Large torque, no slippage.
2016 · Part B · Q1(a)(iii) · 5 marks · p.2
The truck steering is controlled by turning the knob on the roof of the cab. Describe, using suitable sketches, how this steering can be achieved. Name any mechanism required.
2015 · Part A · Q16Disadvantage · p.5
State one advantage and one disadvantage of using a chain drive in a mechanism. [Image: A bicycle chain drive mechanism showing sprockets and a chain.]
2015 · Part A · Q16Advantage · p.5
State one advantage and one disadvantage of using a chain drive in a mechanism. [Image: A bicycle chain drive mechanism showing sprockets and a chain.]
2015 · Part A · Q17Y · p.5
Name the parts labelled X and Y of the mechanism shown. [Diagram: A mechanism showing a cam and follower system, with parts labelled X and Y.]
2015 · Part A · Q17X · p.5
Name the parts labelled X and Y of the mechanism shown. [Diagram: A mechanism showing a cam and follower system, with parts labelled X and Y.]
2015 · Part B · Q2(b)(iv) · 5 marks · p.5
(iv) Sketch and name the component parts of a suitable alternative mechanism to open and close the roof. (5 marks)
Marking scheme
Appropriate alternative mechanism sketched: 5 marks (5, 3,2,1). [Sketch: Diagram of an alternative mechanism for opening and closing the retractable roof, e.g., screw drive, hydraulic system.]
2015 · Part B · Q2(b)(iii) · 5 marks · p.5
(iii) Use the following information to calculate the speed at which the roof moves: motor speed: 45 RPM gear wheel Y: 30 teeth toothed track Z: 5 teeth/cm. (5 marks)
Marking scheme
Calculation: 45 teeth / 5 teeth/cm = 9 cm. [Calculation steps shown: motor speed 45 RPM, 1 rotation = 1 tooth, 45 teeth = 45 cm, speed = 45 teeth/min = 9 cm/min.]
2015 · Part B · Q2(b)(ii) · 5 marks · p.5
(ii) The roof rests on four gear wheels, one of which (Y) is driven by the motor. Sketch and name a suitable mechanism to link all four gear wheels such that they are all driven by the single motor. (5 marks)
Marking scheme
Appropriate mechanism sketched: 5 marks (5, 3,2,1). [Sketch: Diagram of a gear train linking four gear wheels, driven by a single motor, to operate the retractable roof.]
2015 · Part B · Q2(b) · 10 marks · p.5
2 (b) The graphics show a mechanism to open and close a retractable roof. The motor and the gears (X and Y) are attached to the retractable roof. The roof and motor mechanism move along the toothed track Z when opening or closing. [Diagrams: A mechanism showing a retractable roof moving along a toothed track Z, driven by a motor and gears X and Y. Close-up of motor and gears X and Y. Images of a roof in the 'open' and 'closed' positions.] (i) Name the parts of the mechanism shown at X and at Z. State one advantage of using this mechanism to open and close the roof. (10 marks) [Visual aid: Diagrams: A mechanism showing a retractable roof moving along a toothed track Z, driven by a motor and gears X and Y. Close-up of motor and gears X and Y. Images of a roof in the 'open' and 'closed' positions.]
2015 · Part A · Q20 · p.5
Calculate the speed of the driven pulley from the information given. [Diagram: A pulley system with a driver pulley (Ø 15mm, 150 RPM) and a driven pulley (Ø 30mm).]
2015 · Part A · Q23 · p.6
Explain why two motors are used in the toy hovercraft shown. [Image: A toy hovercraft with two propellers visible.]