Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (6)
2018 · Part A · Q14 · 100 marks · p.4
Complete the truth table for the logic gate arrangement shown. [Diagram: A logic circuit with two inputs A and B, feeding into a NAND gate, followed by an inverter (NOT gate), with the output labelled Z. A truth table with columns A, B, Z is provided, with rows for A=0, B=0; A=0, B=1; A=1, B=0; A=1, B=1. The output Z is shown as 0 for the first row.]
Marking scheme
MA = 4 : 2 mks
2017 · Part A · Q14 · p.4
Complete the truth table for the circuit shown. [Diagram: A logic circuit with inputs A and B, and output C, controlled by switches.]
Marking scheme
[Completed truth table: Row 1: Open, Open, Off. Row 2: Open, Closed, On. Row 3: Closed, Open, On. Row 4: Closed, Closed, On.]
2016 · Part A · Q14 · p.4
Name the logic gate represented by the circuit shown. [Circuit diagram: a schematic showing two switches in series controlling a light bulb, with the input points before the switches.]
2016 · Part B · Q6(a) · 26 marks · p.8
A system diagram, to control entry and exit through a security gate, is shown. The gate will open if a vehicle is detected by the entry or exit sensor and a valid code is entered at a keypad. The gate will close if no vehicle is detected by the sensors. A security light will switch on at night while the gate is opening. Note: The light sensor will output a ‘0' in darkness and a '1' in daylight. The keypads will output a ‘l' when a valid code is entered. The entry sensors will output a ‘1’ if a vehicle is detected. [Diagram: A system diagram for a security gate control. It shows a light sensor, entry keypad, entry sensor, exit sensor, and exit keypad feeding into logic gates labelled A, B, C, D, E, F. Outputs are 'LIGHT ON', 'OPEN GATE', and 'CLOSE GATE'. A security light, gate, keypad, and sensor are also illustrated.] (i) Name the logic gates required at A, B, C, D, E and F. (ii) Draw a truth table for the logic gates at C and at D.
Marking scheme
(i) [A: NOT, B: AND, C: AND, D: OR, E: NOT, F: AND]. (ii) [C: AND [Truth table: X=1, Y=1, Z=1; X=1, Y=0, Z=0; X=0, Y=1, Z=0; X=0, Y=0, Z=0]. D: OR [Truth table: X=1, Y=1, Z=1; X=1, Y=0, Z=1; X=0, Y=1, Z=1; X=0, Y=0, Z=0]].
2014 · Part A · Q14 · p.4
Identify the logic states of the circuit at points X and Y. [Logic Diagram: A logic circuit with inputs and outputs labelled X and Y. Input values are 1 and 0.]
2014 · Part B · Q6(i) · 10 marks · p.8
Name the logic gates required at A, C, D and E.