Study notes
No notes have been generated for this topic yet. Open the topic page online and click Generate notes first.
Past exam questions (1)
2018 · Part B · Q1(b) · 10 marks · p.3
The graphics show a design for parts of an office stapler. The top is to be manufactured from 3 mm acrylic. The staple holder and base are to be manufactured from steel. [Image: A standard office stapler. A separate 3D isometric view of the stapler's top component. A separate 3D isometric view of the staple holder. Arrows labelled X and Y indicate positions for holes.] (i) Make a well-proportioned sketch of the development of the staple holder Indicate clearly on your sketch the position of all cutting and bend lines. (ii) Explain, using sketches, the steps required to manufacture the top from 3 mm acrylic sheet. Name any tools required and state the processes used. (iii) Describe, using sketches, how to produce the holes marked X and Y, in the top. Name any tools required and state the processes used. (iv) Staple strips are easily broken if not stored correctly. Sketch a suitable design for a container to solve this problem. [Image: A pile of broken staple strips.]